12-13-2023, 04:00 AM
This may not be applicable for the CB1100, but since this is the "other bike" section, it may find use for your "other bike"
I used Pelican cases on my 2016 Moto Guzzi 7II. Photos below:
Fender washers may not have been necessary inside the case, but I like robust.
I taped the bracket for 5 mm bolts, then added locking nuts to the back side. May not have been necessary.
Pelican 1170 cases
https://www.pelican.com/us/en/product/ca...ector/1170
Interior (L×W×D)
10.54 x 6.04 x 3.16 in (26.8 x 15.3 x 8 cm)
Exterior (L×W×D)
11.64 x 8.34 x 3.78 in (29.6 x 21.2 x 9.6 cm)
Apache 1800 cases used on my current Moto Guzzi V7-850
https://www.harborfreight.com/1800-weath...64550.html
Internal dimensions are 8 1/8" x 5 5/8" x 3 3/4"
I used Pelican cases on my 2016 Moto Guzzi 7II. Photos below:
Fender washers may not have been necessary inside the case, but I like robust.
I taped the bracket for 5 mm bolts, then added locking nuts to the back side. May not have been necessary.
Pelican 1170 cases
https://www.pelican.com/us/en/product/ca...ector/1170
Interior (L×W×D)
10.54 x 6.04 x 3.16 in (26.8 x 15.3 x 8 cm)
Exterior (L×W×D)
11.64 x 8.34 x 3.78 in (29.6 x 21.2 x 9.6 cm)
Apache 1800 cases used on my current Moto Guzzi V7-850
https://www.harborfreight.com/1800-weath...64550.html
Internal dimensions are 8 1/8" x 5 5/8" x 3 3/4"