08-24-2013, 11:16 AM
(08-23-2013, 02:01 AM)meowguy_imp Wrote:(08-23-2013, 12:57 AM)Deanohh_imp Wrote: The purpose of the switch on the front brake lever is to turn on the brake light when you pull the lever. Make sure the wires are pushed on the switch all the way and if it still doesn't work, take it in under warranty.
That was it. One of the connectors was completely off. I will have to make this one my checks before getting underway in the future.
Thanks all.
That was it. One of the connectors was completely off. I will have to make this one my checks before getting underway in the future.
Thanks all.
[/quote
Usually just a pinch with a pair of needle nose pliers will do the trick no need to add tape which will just fall off and disconnect again.
