11-17-2013, 12:13 PM
Were the bearings removed for powdercoating? What was your method to remove and reinstall the bearings. If you don't have exactly the right tools for this, I suggest you get the new bearings professionally installed at a shop. The placement driving in the bearings and the seating to the center distance collar (tube thingie) is critical, as is torque of the front axle bolt.
The milage isn't what matters. Its when you drive out the outer race by forcing the inner race that is bad.
The milage isn't what matters. Its when you drive out the outer race by forcing the inner race that is bad.