01-16-2015, 10:47 AM
I cracked my speedometer housing when I fell over in the yard from braking in damp grass. I applied some JB Weld 5 min epoxy to the crack and then pulled it tight with black electrical tape. After the glue set the fix was pretty tight. Then I installed the chrome covers. As mentioned earlier, I wanted to make sure I had a water tight seal before I covered it in chrome.
Other than the cover, looks like your bike is in pretty good shape. Mine was the same, only damage was the cracked cover. I would have thought I'd bent a handle bar, turn signal or something.
Other than the cover, looks like your bike is in pretty good shape. Mine was the same, only damage was the cracked cover. I would have thought I'd bent a handle bar, turn signal or something.