05-16-2021, 06:14 AM
I had a similar problem on my CB as they were stained from the previous owner and just did not look good. If they have a uniform gold color that is OK but when they have road dirt/grime/tar that is cooked on that will not do. Now this is what I do and there is a caveat and that is don't do this if you have any qualms about your abilities. I use Easy-Off oven cleaner with #0000 steel wool and Wizard's metal polish (polish infused cotton). Use aluminum foil to mask off any paint areas as it clings and can be form fitted. Start with one pipe and leave on for 30 minutes or more and then use the steel wool then recoat. Do this for all the pipes and put on as many coats as possible each time using the wool for cleaning. Then finish up with the Wizard's. Now here in SoCal many formerly caustic chemicals have been taken off the market so, if you are in another state make sure to double up on your precautions. Like I say, do at your own risk but, I have done it on several bikes with good results.