06-08-2015, 06:44 AM
I have one. Measure the tread depth on a new oem front tire. We did this in 2013 I think. It was ( going by memory here) 5/32 with a replacement due at 2/32. 3/32 on an inch doesn't give you many miles.
An aftermarket tire (I think) gives you 7/32 of tread.
I'll see if I can find the thread.
See post 7 in this thread... Wow only 4/32 with a replacement at 2
http://cb1100forum.com/forum/showthread....read+depth
Notice if you measure tread used per 1000 miles the rear is wearing faster than the front as we all would expect, there just isn't much tread on the front so you go thru what tread is there before you run thru the deeper rubber on the back.
An aftermarket tire (I think) gives you 7/32 of tread.
I'll see if I can find the thread.
See post 7 in this thread... Wow only 4/32 with a replacement at 2
http://cb1100forum.com/forum/showthread....read+depth
Notice if you measure tread used per 1000 miles the rear is wearing faster than the front as we all would expect, there just isn't much tread on the front so you go thru what tread is there before you run thru the deeper rubber on the back.
