risers and shield

[wiredgeorge_imp]

I got some handlebar risers for a Suzuki many years ago that I ended up not using from Twistedthrottle.com ; they are sw-motech brand and are 1" risers. It took a few seconds to install them and no changes to cables were needed. I found that I had more weight on my wrists than I liked.

Here is a link to the risers. I don't recall paying as much as they are getting now.
http://www.twistedthrottle.com/handlebar...-sw-motech

I also put on an OLD Memphis Shades shield. It bolts to bars and upper fork tubes. The shield would not fit with the upper mount arms I had so I asked a member to fab me some stainless mount arms and they work perfect. The Memphis Shades mount hardware allows their shield to be mounted to a huge variety of bikes. I put some rubber under the lower mount brackets so I wouldn't scratch the fork tubes. Only drawback is that mount hardware is SAE and not metric.