05-28-2015, 07:36 PM
OK, so now you have what appears to be stock size tires and the triple clamps are all the way up on the forks? I can't see that, but I'm going to make the assumption due to the faring placement.
Preload might raise the back ¼", but the front won't move. Being 260# myself I have to avoid speed bumps. I found that out the hard way as I have a ton of them in my complex. I don't even risk them any more and just go around the edges of them.
As far as your ramp issues go, not really sure what to tell you about that. Sounds like one of those rock and a hard place issues to me and neither one is going to budge.
Preload might raise the back ¼", but the front won't move. Being 260# myself I have to avoid speed bumps. I found that out the hard way as I have a ton of them in my complex. I don't even risk them any more and just go around the edges of them.
As far as your ramp issues go, not really sure what to tell you about that. Sounds like one of those rock and a hard place issues to me and neither one is going to budge.