Headers

[Hedge_imp]

So I got the correct info from Mr.T and now they seem to match.
Wetbike -
Thank you for using Webike Japan.
2 Yoshimura exhausts you mentioned will fit straight on to CB1100 standard model without removing the center stand.

You can unscrew the oil drain bolt, but will have to remove the exhaust to change the oil filter for both model.

Hand bent
http://japan.webike.net/products/21777076.html
1 stock left in webike

Machine Bent
http://japan.webike.net/products/21777077.html
out of stock: delivery in 2 month upon order.

You will notice the narrow smooth carb of the exhaust pipe for hand bent, and rather sharper bent for machine bent.
If you have any questions, please feel free to contact us.

Mr T -
Thank you very much for your inquiry.

Regards to your questions about,,

MORIWAKI Part Number 01810-401G1-00
Yoshimura Hand Bent Model:110-41A-4860
Yoshimura Machine Bent Model: 110-41A-6660

Yes, the center stand can be used for the 3 exhaust systems.
Yoshimura exhaust systems needs to be removed when access the oil filter. But, you can access the oil drain plug without removing the exhaust system.

Moriwaki exhaust can be accessed the oil drain plug and oil filter without removing the exhaust system.

There are no big difference between the Machine bent and Hand bent.
But, many people says the Hand bent ones are beautiful than than the Machine bent ones.

and, the Aluminum flanges are for the RSC-DRAG Exhaust only.

http://www.samurider.com/?p=12614/#itemImage

The 3 exhaust system uses black steel flanges.

Looking forward to hearing from you.
Thank you very much,

Takashi

So it looks like I will be researching the Moriwaki since removing the exhaust to get the oil filter out is a huge deal breaker for me. Any Moriwaki exhaust system riders here? Any sound clips?