03-23-2016, 01:21 AM
Based on the information below, gleaned from Cerakote, it looks like their coatings were designed for use on exhaust components. However, it may require a base with clear combination to provide the benefits they claim. I look forward to your testing because it would be nice if the clear worked by itself to preserve the appearance of the polished metal beneath.
Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F.
Performance Proven Hight Temp. Coating
Heat stable up to 1,100°C
Excellent Corrosion Protection
Extreme Hardness
Maximum Chemical Resistance
Thermal Barrier Protection
All of our NIC Cerakote Ceramic Products are track-tested in our 2800 HP Pro Mod Corvette.
Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F.
Performance Proven Hight Temp. Coating
Heat stable up to 1,100°C
Excellent Corrosion Protection
Extreme Hardness
Maximum Chemical Resistance
Thermal Barrier Protection
All of our NIC Cerakote Ceramic Products are track-tested in our 2800 HP Pro Mod Corvette.