06-28-2013, 10:45 PM
Just performed my first service at 516 mi using Repsol 10W30 Full Syn and OE Honda filter. I let the bike drain hot both on the center stand and then on the side stand. I poured in ~3.8 quarts of oil and started the bike and let it run for about 2 min. Oil settled to the lower line. I then added about 1.5 ounces to the top line and started the bike for another minute. Shut off and let it settle. Oil level is right on the top line. After the filter soaks in a bit I may need to add a bit more but will know after my first ride. I would say overall you are replacing 3.9 - 4.0 qts of oil on a typical oil change.