11-01-2016, 10:08 AM
Ok for anyone wanting to know. On the 2013 CB1100 you remove 4 screws on the back of the plastic housing and then you have to drop the headlight to remove the plastic housing. I had a broken plastic standoff underneath that I was able to JBWeld back into place. For the crack I JB Weld the crack on the inside and superglued the crack on the outside. The crack is only 1 3-4 inches long. I feel this solution. will keep any excess moisture out and should be good to go. The lower cover housing is $84. I may eventually replace it, but want to see how this looks.