08-15-2017, 03:50 AM
That is the same one I have. If you look at the photo on Samurider that shows the plastic bag with parts in it you need all of those.
The links to your pics didn't work for me so I couldn't see what you have.
But the headlight must be moved further forward for that windscreen to work. You should have some extended headlight brackets. Replace those first. Then there are some brackets that mount the sides of the screen to the top triple tree clamp bolt. Due to the compound angle each side uses a larger bracket (attached to the top edge of the screen) and a shorter L bracket which mounts to the triple tree. A bolt attaches the larger bracket to the L bracket. Then there is a bracket that mounts underneath to the bolt that holds the horns.
I will take some photos when I'm back in my garage and post them here later today.
If you were given all of the mounting brackets it isn't hard to assemble. My pics will help. I will get them up in a few hours.
It's this one
https://www.samurider.com/?p=13212
What I have
https://jasonpicton.smugmug.com/My-First...-GWLBjk8/A
https://jasonpicton.smugmug.com/My-First...-8C65dwJ/A
I don't believe it attaches the same way as the chic Lucky day I just found the diagram I got with my screen. Let me know if you still have questions.![[Image: 14a6eeabc53e0b6b31b9106b1c9b69e8.jpg]](https://cb1100forum.net/forum/uploads/imp/201708/14a6eeabc53e0b6b31b9106b1c9b69e8.jpg)
Sent from my iPhone using Tapatalk
The links to your pics didn't work for me so I couldn't see what you have.
But the headlight must be moved further forward for that windscreen to work. You should have some extended headlight brackets. Replace those first. Then there are some brackets that mount the sides of the screen to the top triple tree clamp bolt. Due to the compound angle each side uses a larger bracket (attached to the top edge of the screen) and a shorter L bracket which mounts to the triple tree. A bolt attaches the larger bracket to the L bracket. Then there is a bracket that mounts underneath to the bolt that holds the horns.
I will take some photos when I'm back in my garage and post them here later today.
If you were given all of the mounting brackets it isn't hard to assemble. My pics will help. I will get them up in a few hours.
(08-15-2017, 01:54 AM)Hondahawkrider_imp Wrote:(08-14-2017, 09:21 PM)chync_imp Wrote: If it's the chic design aluminum fairing that samurider sells it requires brackets for the headlamp and two brackets that mount to the triple tree. Can you post photos of what you bought with all of the parts?
Sent from my iPhone using Tapatalk
It's this one
https://www.samurider.com/?p=13212
What I have
https://jasonpicton.smugmug.com/My-First...-GWLBjk8/A
https://jasonpicton.smugmug.com/My-First...-8C65dwJ/A
I don't believe it attaches the same way as the chic
It's this one
https://www.samurider.com/?p=13212
What I have
https://jasonpicton.smugmug.com/My-First...-GWLBjk8/A
https://jasonpicton.smugmug.com/My-First...-8C65dwJ/A
I don't believe it attaches the same way as the chic Lucky day I just found the diagram I got with my screen. Let me know if you still have questions.
Sent from my iPhone using Tapatalk