Installed Battery Tender quick disconnect /w usb - does your CB make this noise?

[LordWasr_imp]

Morning all, woooo y’all are awesome ! I was expecting everyone to be annoyed of my questions hahaha. But firstly, thanks for responding ! I’ve read all of your posts twice so I understand . I also read the manual before taking the battery out too but maybe got nervous and forgot something when I made the spark lol!

Taking out battery
1)Negative out
2)Positive out

Putting it back in
1)Positive In
2)Negative In

I woke up an hour early to check the thread and to redo the leds just Incase I put them in wrong, which I did . I’ll upload a pic shortly of what it looks like. I’ll also report in on the clicking sound .

This is what I’m understanding
Battery + Bike Cable + Tender Leads sit on top + screw

So pretty much the same position as when I popped the seat off originally . Now I’m just removing the screws placing the “pigtail leads” on top and screwing back in.

Thanks everyone!!!
Ok, I'm back so I tried taking the negative off and checked for sound and it's there. So i'm just going to assume it's normal.

I re did the pigtails and have attached some photos. I also forgot to ask, for the tool compartment basket is it supposed to be flush when I put it back in? I forgot to take a before photo to see how it was originally. When I placed it back, I just sort of screwed it in place and popped the button in. Looks kind of weird with a gap but I'm not sure if this is right lol.

how I wired it the first time

how I wired it this morning (revised)

how the bucket looks when screwed in ( has gap )

a better pic of the gap

thanks everyone .