08-07-2018, 10:13 AM
(08-07-2018, 10:06 AM)Lord Popgun_imp Wrote: And, just so you know, the firing order doesn’t change. It done by the cam timing (lobe position on the cams) on, IIRC 2 cyls. Sportsterdoc or Powerdubs will most likely be along to explain it better than I.
Thanks Popgun.
(08-07-2018, 09:48 AM)Dave_imp Wrote: I’ve noticed that at speeds above 40 or so and around 2500-3200 RPM, I’m feeling some roughness while riding.
My 2014 suffered from a similar roughness when new. Had it back to the dealer twice, and they couldn't find anything wrong with it. "If" it's the engine running slightly rough (like mine was), then try the throttle position sensor reset - it cured my problem immediately: With the engine off, and the key on, slowly rotate the throttle to wide open, then slowly back to full closed. Repeat two more times. Turn off key, turn key on, restart, and test ride. Please post your results. Good luck.
Thanks, Dave. I will try the throttle reset tomorrow and Ill let you know if there is an improvement.