04-20-2015, 08:57 AM
(04-20-2015, 08:41 AM)Lord Popgun_imp Wrote: Well, it appears that in the pic, the brake hoses are too short? Making it hard or impossible to align the mounting bolts?I'll try holding up the step holder frame. Memory tells me there wasn't much trouble removing the lever.
The pub says to remove the hoses to get it off and put them back on after installation. Other than that, it LOOKS like you may have to hold up the step holder and bolt it up.
White dog,
I have your email. I'll send the scans of the pages on this. The manual says to remove the hoses to remove the master cyl. and to put them back on after re-installation. There are also some nice exploded views of the parts.
In your case, it LOOKS like the hose is too short and you can't get the bole in. So maybe holding up the step holder and bolting it up is what you may have to do. I could be wrong...
Give me a few to scan the pages and send them to you.
sorry about the weird double like post, not sure what happened.
If I have to disconnect the hoses, won't that introduce air into the system?