10-29-2018, 10:41 AM
(10-29-2018, 07:11 AM)dsan1964_imp Wrote: What’s happening fellow CBer’s. I had the great idea to re-cycle take out old and add new,clutch fluid and brake fluid , and I put the tops back on and it seems that I keep getting a little leak or blow back mist of fluid. I have thoroughly cleaned and they are not over full I’m thinking about getting new gasket does anybody know any tricks or ran into this thanks.
Sent from my iPhone using Tapatalk
There are no tricks, but proper diagnosis..is your lever/pedal soft, spongy or you have leaking fluid...or something else, specify, please.
Cover gasket has nothing to do with pressure.
It is very rare that after flushing brake/clutch fluids your seals/o-rings failed and are not holding proper pressure..
If bleeder was not tight enough follow Max & Popgun advice
