01-08-2019, 05:27 AM
(01-08-2019, 05:07 AM)Flynrider_imp Wrote: I fixed this on my '13 model last year (after a deer impact).
The '13 and '14 have different meters, but I think the procedure is basically the same.
On mine, both the outer cover and the inner (white) plastic mount were both badly cracked. Instead of buying new meters (which will reset your odometer), I opted to buy the plastic outer cover and plastic board mount separately. As I recall, the cost was less than $100 for both pieces. Here's a short post I made about it :
http://cb1100forum.com/forum/showthread....#pid205961
If your outer plastic is intact and the inner (white) plastic piece just has a single crack, I'd definitely go with a JB weld or other epoxy fix.
BTW, that "loose" feeling on the meters is normal. They're rubber mounted and can easily be moved by hand.
Yea, the only piece cracked is the white plastic piece. The other piece has a small nick that I can live with. I looked at your post and I found it interesting when you talked about the amount of screws it took. When I disassembled mine last night, it took only seven screws to get to it.