Any interest in cams?

[PowerDubs_imp]

Surprise- he contacted me and told me plans changed.

So- at the last minute, I went and dynoed in extremely humid 90 degree weather.

Not going to lie, I was hoping for more, but 100whp was achieved.

Can I get a special title under my name?

Check out the tq curve. Nuts to see it climb.

Also- check out the a/f- I only rode about 70 miles since I put the cams in, not hard, and I am nowhere close to what I think ideal A/F for power or tq would be.

Also keep in mind this is stock ecu so the ign timing has not been changed!

From discussions with some friends that are more experienced with tuning than I am, the WBO2 sensor can only read so quickly, and you are only at each RPM for a split second, so manual tweaking of the fuel table will be needed.

You can see that where the power and tq start to drop off is right where the fueling leans out.

I’m sort of disappointed yes, but not done yet...

Here is the dyno-







Here is the A/F-








And here is today’s dyno compared to stock w/ the staintune muffler-





Sent from my iPhone using Tapatalk