06-29-2019, 05:13 PM
Hi Jfro, should be fine, here is a link to a picture that shows the small vacuum hoses, four seem to combine and provide vacuum to the valve just below the vac. lines.
the other three connect to the map. Manifold Air pressure Sensor.
http://cb1100forum.com/forum/showthread....#pid194994
picture shows tb upside down and injector side.
provided there is no flow leakage in the scottoiler which could cause a lean condition in cyl #4 at low throttle position.
the other three connect to the map. Manifold Air pressure Sensor.
http://cb1100forum.com/forum/showthread....#pid194994
picture shows tb upside down and injector side.
provided there is no flow leakage in the scottoiler which could cause a lean condition in cyl #4 at low throttle position.