06-28-2019, 06:33 PM
My very first thought on reading the first post was "dodgy electrical connection".
As we know, the kill switch is a prime suspect, followed by any wiring recently disturbed, and then a laborious "disconnect/clean/reconnect", hoping you strike lucky. Use contact cleaner and work your way through the obvious connections first, as Max has outlined above.
And are you SURE that kill switch is OK...?
Good luck with this
As we know, the kill switch is a prime suspect, followed by any wiring recently disturbed, and then a laborious "disconnect/clean/reconnect", hoping you strike lucky. Use contact cleaner and work your way through the obvious connections first, as Max has outlined above.
And are you SURE that kill switch is OK...?
Good luck with this
