04-06-2020, 07:17 AM
(04-06-2020, 06:54 AM)misterprofessionality_imp Wrote: update, i've attached the ground to the housing of the light and now found that i get a solid light when i turn on the bike. both filaments illuminated, and no flashing when i depress the brake. that can't be correct can it?Yes, working as it should. The original taillight ground was through the green in the harness. This now grounds through the metal taillight housing/steel fender/frame.
You don't have to use the green ground wire, but it definitely doesn't hurt.
Some aftermarket taillights use the green wire, but if you only have 2 wires, then it grounds through the bracket/fender/frame.
Is it one of these?
