Posts: 23,403
Threads: 697
Likes Received: 482 in 220 posts
Likes Given: 597
Joined: Apr 2025
(06-01-2015, 10:36 AM)Flynrider_imp Wrote: (05-31-2015, 08:38 PM)The ferret_imp Wrote: Flyn..go to DMV and tell them you lost your plate and get another. Then put the black lic plate frame around it like Chip Beck did. it will look great!
Ever since I discovered that someone ran into my license plate a few months ago (didn't touch any other part of the bike), I've been thinking about swapping it for a personalized plate. I just haven't made up my mind what to put on it 
Ever since I discovered that someone ran into my license plate a few months ago (didn't touch any other part of the bike), I've been thinking about swapping it for a personalized plate. I just haven't made up my mind what to put on it
FLYN or FLY N
seems to fit!
Posts: 217
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
I have 2 plates left and just lowered the price to get these gone.
$5 less than before so if you been on the fence now is a good time to hit this link and then click your way to a new license plate bracket that doesn't hold 3 ugly reflectors or cover your rear fender
[url=https://www.etsy.com/listing/227900177/2013-2014-honda-cb1100-license-plate?ref=listing-shop-header-1]THIS LINK:::
[url=http://s1216.photobucket.com/user/metalmaven/media/Mobile%20Uploads/2015-03/20150330_070220.jpg.html]
![[Image: d9b6d6e3fc062bb28dc8cc745a489a34.jpg]](https://cb1100forum.net/forum/uploads/imp/201506/d9b6d6e3fc062bb28dc8cc745a489a34.jpg)
Posts: 921
Threads: 42
Likes Received: 5 in 4 posts
Likes Given: 2
Joined: Apr 2025
Sure, drop the price a couple days after mine arrives.
Posts: 217
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
(06-04-2015, 11:51 AM)kennyw_imp Wrote: Sure, drop the price a couple days after mine arrives.
Kenny I figured that may upset those that have ordered in the past, but its only $5. Please don't let it ruin your day. I had 2 plates, well one now, left from my first run of plates. My new version has slotted holes to fit both Virginia style license plates and regular style plates that most others use. I was only trying to get these last 2 out the door give 2 folks a little incentive that may have not ordered otherwise. I was not trying to make anyone mad, I apologize.
Posts: 921
Threads: 42
Likes Received: 5 in 4 posts
Likes Given: 2
Joined: Apr 2025
I'm not upset. I spend that much on coffee everyday. Just giving you a hard time. I think you make a great part at a good price.
Posts: 217
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
(06-05-2015, 03:09 AM)kennyw_imp Wrote: I'm not upset. I spend that much on coffee everyday. Just giving you a hard time. I think you make a great part at a good price.
ok cool! lol, have a good weekend and thanks for the support. Jeff
Posts: 217
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
I almost have my new and improved License Plate Brackets ready. This new batch has slotted holes for the License Plate itself so it will fit Virginia plates as well as the typical size hole pattern. I want to thank everyone that has bought one of these, the feedback has been all good!
I will also have an option to buy one of my plates WITH the triumph rubber bands that our fine forum member GHIS has discovered and shared with us in his "[url=http://cb1100forum.com/forum/showthread.php?tid=5871&highlight=cables]those cable were driving me crazy" thread. They seem to be on backorder everywhere, including where I ordered them from, so this will be a way to get them faster and pay way less shipping cost!~
Posts: 217
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
I wanted to publicly humiliate I mean thank Papa Weeley for letting me use a photo featuring the sexy rear end of his Red CB1100.
https://www.etsy.com/listing/227900177/2...p-header-1
Posts: 16,124
Threads: 342
Likes Received: 668 in 367 posts
Likes Given: 782
Joined: Apr 2025
Should I say you should both be ashamed? Or nice work?
The latter I think.
Posts: 18
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2015
just ordered the brushed al plates from etsy... looking forward to the install...
