Login

redbirds_imp · 02-07-2014, 04:40 AM

Installed this new Puig last night and did an 80 mile ride today. Works perfect for me and my short stature. No buffeting and the wind blast is off my chest. I'm ready for some touring now.

http://www.monsterparts.com/mm5/graphics..._large.jpg

the Ferret · 02-07-2014, 06:15 AM

Redbirds, please measure from the ign to top of screen for me please.

redbirds_imp · 02-07-2014, 06:43 AM

Right at 12" from the ignition switch to the screen top.

Hope that helps.

the Ferret · 02-07-2014, 07:21 AM

Well it is interesting, in that most of the guys with shields that have reported no buffeting to the helmet, but relief from chest air pressure have been in the 8 1/2 to 10" above the ign range. Yours maybe due to shape is above that. Thanks for measuring. Post up a pic of your bike when you get a chance.

redbirds_imp · 02-07-2014, 09:28 AM

Here's the pics.

[Image: a5eb61cdf77f0d7cf3b5775ca43e502c.jpg]

[Image: f36635563cb8bd175076aa1563cb6b7f.jpg]

[Image: 8c8652d5d705aa58edac123ee8a7ecf3.jpg]

Rolls_imp · 02-09-2014, 10:14 AM

After 7 months and 8,000+ miles, I've been very satisfied with the Puig. Appropriate wind blockage, zero problems, no buffeting, and it's holding up well (no hazing, fine scratches, or other signs of wear/age appearing).

I mounted mine slightly differently, though, redbirds... I slid the metal bracket down on the inside of the headlight support. Because the Puig bracket is so thin, it slid in there nicely.

redbirds_imp · 02-09-2014, 10:24 AM

(02-09-2014, 10:14 AM)Rolls_imp Wrote: After 7 months and 8,000+ miles, I've been very satisfied with the Puig. Appropriate wind blockage, zero problems, no buffeting, and it's holding up well (no hazing, fine scratches, or other signs of wear/age appearing).

I mounted mine slightly differently, though, redbirds... I slid the metal bracket down on the inside of the headlight support. Because the Puig bracket is so thin, it slid in there nicely.

I intend to do that also. Makes for a cleaner looking mount.

dBuster_imp · 02-09-2014, 11:38 AM

I like the look. But I wonder how it would be for me and my 6 foot 1 inch tall frame.

Or is there a different recommendation for me. I have the main threads talking about the different screens subscribed but it is so hard to decide and it isn't like you can buy one install it and if it doesn't suit you return it for a different one or can you?

Sent from my XT1055 using Tapatalk

SanPete_imp · 02-09-2014, 12:01 PM

Only if you buy it at Walmart.

Sent from my SM-T217S using Tapatalk

emptysea · 02-09-2014, 12:42 PM

Ferret, do you know the ignition-to-top measurement on the NC Deflector?

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	to puig or not to puig (or, which Puig screens fit ?)	j3gq_imp	53	3,456	05-30-2022, 04:13 AM Last Post: j3gq_imp
	MRA Vario-screen	ChiefJP_imp	6	611	05-11-2022, 01:07 PM Last Post: GoldOxide_imp
	Puig Vision Windscreen	Interceptor Pilot_imp	5	541	03-03-2022, 08:39 AM Last Post: GoldOxide_imp
	Puig now listing the CB1100	CB4ME_imp	8	637	01-24-2022, 04:34 AM Last Post: j3gq_imp
	Puig Plus install question	Rolls_imp	16	1,263	01-24-2022, 04:33 AM Last Post: j3gq_imp
	Puig Windscreen Quality	Skypilot_imp	13	886	11-01-2019, 11:43 AM Last Post: MWV1500_imp
	Road Comet II: Puig Clip-on Visor?	Townie_imp	5	453	08-10-2019, 05:16 AM Last Post: warman_imp
	Winter mods complete - screen/bars/grab rail/saddlebag	TPK12_imp	4	595	04-08-2019, 12:41 PM Last Post: GoldOxide_imp
	Dart Marlin Fly screen	Ennsync_imp	19	1,257	12-26-2018, 02:51 AM Last Post: GoldOxide_imp
	Dart Fly screen	chandler_imp	6	446	11-03-2018, 11:22 AM Last Post: Doug Shepard_imp

Threaded Mode Puig Plus Screen
Author	Message