SW-Motech Legend Gear

[metallyguitarded_imp]

I've been waiting for the right saddle bag to come along that suits both my desire for practicality and aesthetics. I think I found both in the SW-Motech Legend Series saddle bag(s). I ordered the 13.5L bag (just one for now) with the required harness that wraps around the seat. I plan to mount it on the left side and run a single bag. If and when I plan to make longer trips, I'll look into ordering one for the right side and maybe even a tail bag.

I received the bag and harness last night and mounted them yet. I took a few photos and read through the instructions. It seems easy enough. I'll report back after I've had a chance to ride with it and I'll include photos of the bag mounted to the CB. For now, here's what I received:

[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/B6497BB9-889A-478C-98BD-1F97431D5154_1.jpg.html]
Both the saddle bag and harness came in canvas, drawstring bags. Nice touch. I'll try to find another use for the canvas bags as I imagine once the saddlebag is mounted, I won't have much use for them.

[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/9A97D21B-489A-49E7-9C54-8D0528B280B9.jpg.html]
Here are the bag and harness. Both seem to be high quality pieces.

Here are a few more shots of the saddlebag:

[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/429409F2-86C7-4497-A14B-702779AD144E.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/c00a22d8-633b-48c7-abd1-4b9bbdf46bbb.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/50D73A43-41CA-4512-BD0D-2C69ECE9A2C9.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/F2546FF6-2655-4887-8F27-289E810CAAF2.jpg.html]

Not pictured are additional straps used to secure the sides of the bag to the bike as well as a waterproof bag that can be used inside of the saddlebag. They also included a large, clear adhesive film that can be cut and used to protect the bike's paint in any areas where the straps or bag may rub. Well thought out addition.

I'm excited to try the bag out and hope it works as well as it looks!

[Nemo_imp]

[redbirds_imp]

Nice, SW Motech builds quality gear.

[rboe]

I have an older set of these that I use on the Griso. Dry. Dry. Dry.

I used KlickFit (sp?) adaptors so they clip on the stock griso racks. I'm a bit fan of dry bags now - no matter the brand as all seem to be very good.

[ingobohn_imp]

Do you have any pics with the saddle bag mounted at your bike?

[metallyguitarded_imp]

Do you have any pics with the saddle bag mounted at your bike?

The good news is that I got the bag on the bike. The bad news is that I don't have pics yet!

Getting the harness onto the seat proved much harder than anticipated. The directions are easy enough: Take the seat off, wrap the straps under the seat and affix the buckles. Be sure not to hinder the latching mechanism. It was that last direction that gave me all the trouble.

Turns out I couldn't figure out a way to get the seat to securely connect with the buckles inside/under the seat. It didn't matter where I moved the buckles (center, left or right), it prevented the seat from latching closed. Fortunately, the straps are long enough that I was able to run just one strap under the seat and out the other side and connect the buckles on the outside of the seat. Now, it has no effect on my ability to remove and replace the seat. All is right in the world.

Pictures to follow!

[metallyguitarded_imp]

I finally had an opportunity to take a few shots of the bag on the bike. Here they are!

[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/4C3D69F8-4992-49BF-B228-F8D9178BEBAB.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/360B6B73-30A2-4054-B52F-7C6621306C9D.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/84D18B5E-502D-4964-B79F-64808ED252A8.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/841CB58D-4108-4907-AF1A-D6AA63B8B544.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/9226B807-5CA4-4550-B468-642D2A1762FC.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/C658C414-1C01-43F9-A5FB-61E103970D27.jpg.html]
[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/1541B867-5DD5-46BC-AF35-20A900187FC2.jpg.html]

I went for a short ride of about 30 miles just to take advantage of the nice weather. The bag stayed put nicely. The helmet in the last shot is the newest addition to my helmet collection - a Biltwell Gringo with what they call their blast shield. I took advantage of the full coverage to hide this:

[url=http://s51.photobucket.com/user/jamesfontaine/media/Mobile%20Uploads/CE724970-23AA-4467-9E6D-19906CA6748D.jpg.html]

Mountain biking! Wouldn't you know it? I guess the trick is to avoid breaking your fall with your face. A skill I'm working on. Luckily, I only hurt my face, my nose, my eye, my neck, my knee and both shoulders. Oh, and my right thumb has been numb for the past three days.

[the Ferret]

ouch! those mountain bikes don't have brakes? lol

Hey the bag kinda balances out not having a pipe on that side. Hang on symmetry.

[emptysea]

Those mountain bikes are dangerous.

Heal up and find a safer hobby; like motorcycling.

[ingobohn_imp]

@ metallyguitarded: thx
Doe the bag sit tightly just with the straps to the foot pegs and with the "adapter plate" on the rear saddle?