Login

ChipBeck_imp · 02-23-2015, 01:43 PM

Most aftermarket slip-ons are smaller than the stock muffler. This is the first one I've seen that is bigger than the stock muffler.

Chip

1100rider_imp · 02-25-2015, 03:08 AM

I believe that the power commander would be a personal choice. I installed the RS-3 last summer and have not noticed any problems.

Bike #12_imp · 03-01-2015, 06:25 PM

I ordered my RS-3 earlier today. I'll post a video after I get it installed.

CBAnonymous_imp · 03-15-2015, 06:20 AM

Had my RS-3 installed on bike before even bringing home from dealership. Quite happy with it so far. Gives a nice throaty note, which I like.[url=http://s1299.photobucket.com/user/cstanley040254/media/CB1100/0A95E0E1-7C28-459A-9704-5ABBA0174000_zpsbvnsggvg.jpg.html] [Image: 9a5d11ae6df7c381cd9aea4b33904e52.jpg]

[Image: 9a5d11ae6df7c381cd9aea4b33904e52.jpg]

cwa5534_imp · 03-28-2016, 09:38 AM

I had exact same problem with the center stand bracket, so no washers on mine either.

(02-12-2014, 02:31 PM)IndianRider_imp Wrote: Called home from work and found out the "package" arrived at home so got off early to install the slip on ..
First impressions :

It weights almost half as much as the stock exhaust .. Did not weigh the mufflers ..

The yoshimura finish/quality is ok .. not as good as stock and other exhaust systems I had in the past ..this is the cheapest yoshimura can ..

The yoshimura center stand bracket is a PITA to install and I busted my fingers but finally installed it without the washers and will revist the install later .. If any owners have tips on the center stand bracket install please share them with me

The sound with the baffle out is nice but a bit louder than my taste ..

With the quiet baffle in, I like the muted bassy sound and that's what I'll be running it with .. The stock can may go back on for any long trips

Overall the can looks pretty good to me with a sporty look .. The CB was missing the big bore Superbike hum and growl like my old zrx 1100 and the slip on gets it close to that feeling ..

uscgmac_imp · 03-28-2016, 11:48 AM

Tip on installing the washers, use a very small piece of black electrical tape to hold the washers in place and then install the bracket.

Sent from my SM-G530T using Tapatalk

adventureAF_imp · 02-04-2017, 08:28 AM

(03-28-2016, 11:48 AM)uscgmac_imp Wrote: Tip on installing the washers, use a very small piece of black electrical tape to hold the washers in place and then install the bracket.

Sent from my SM-G530T using Tapatalk

I'm trying to install this on a '14 standard. Is the center stand attached differently between the '13 and '14?

Sent from my SM-G900V using Tapatalk

uscgmac_imp · 02-04-2017, 08:37 AM

If you own a 14 and bought the 13 muffler the center stand is different. The 14 center stand spring is in the middle as the 13 has the spring off to the side. I bought the 13 muffler for my 14 and had to buy the 14 center stand bracket separate. You can order the bracket straight from the company.

Sent from my SM-T350 using Tapatalk
The 2013 muffler center stand bracket will not work on the 14. The advantage of the 2013 muffler is that it has a removable baffle as the 2014 version of the muffler does not have a removable baffle and is much quieter. The bracket will run you about another 40.00 or so.

Sent from my SM-T350 using Tapatalk

adventureAF_imp · 02-04-2017, 11:28 AM

(02-04-2017, 08:37 AM)uscgmac_imp Wrote: If you own a 14 and bought the 13 muffler the center stand is different. The 14 center stand spring is in the middle as the 13 has the spring off to the side. I bought the 13 muffler for my 14 and had to buy the 14 center stand bracket separate. You can order the bracket straight from the company.

Sent from my SM-T350 using Tapatalk
The 2013 muffler center stand bracket will not work on the 14. The advantage of the 2013 muffler is that it has a removable baffle as the 2014 version of the muffler does not have a removable baffle and is much quieter. The bracket will run you about another 40.00 or so.

Sent from my SM-T350 using Tapatalk

Cool, thanks for the info! I think I have both brackets, (I bought my can used) so I guess my question is more of installation. The instructions are a little vague, they say to remove the center stand shaft bolt, I don't see how to do this without dropping the entire center stand.

Sent from my SM-G900V using Tapatalk

dsan1964_imp · 02-04-2017, 11:52 AM

Same here I ordered a 14 center stand from yosh I bought mine used from jamboa. .... still need to put it on..

Sent from my iPad using Tapatalk

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Yoshimura RS3 replacement for an '13	Jurlie_imp	7	489	07-28-2024, 01:47 PM Last Post: Glockrocks83_imp
	Exhaust system/slip-on	johnny_elpino_imp	26	1,615	05-26-2023, 01:06 AM Last Post: kzoorue_imp
	Arrow Slip-On Thoughts	le_penseur_imp	84	3,798	05-15-2023, 05:20 AM Last Post: mrded_imp
	Yoshimura RSCV Full Exhaust System	Stealth128_imp	43	2,868	11-29-2022, 10:38 AM Last Post: mrded_imp
	Dart flyscreen and a little Yoshimura stain magic	1985CB450_imp	19	1,379	10-24-2022, 04:12 AM Last Post: 1985CB450_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	872	01-05-2022, 10:54 PM Last Post: Nibis_imp
	delkevik slip on mufflers	outback_imp	4	419	10-14-2021, 12:44 AM Last Post: outback_imp
	Delkevic Muffler slip-on	wgscheib_imp	2	268	06-08-2021, 01:48 AM Last Post: GoldOxide_imp
	Arrow slip on mufflers	DougsZ28_imp	15	933	05-13-2021, 04:09 AM Last Post: PowerDubs_imp
	The 2013/2014 Yoshimura Centerstand Bracket Issue	Rox_imp	0	182	07-28-2020, 02:40 PM Last Post: Rox_imp

Threaded Mode Yoshimura Slip-on!
Author	Message