Where to tap speed sensor signal?

[Lord Popgun]

Egleaves, Does your diagram have page numbers on it? What are they?

Example 20-5

I ask as in the service manual they do not reference bikes by 1100E or 1100SA. Just CB1100 ‘13 model, or CB1100A after ‘13 model. That would be the deluxe as in ‘14 it was the only ABS model. I’m not sure what E model is, although Cormanus posted a list somewhere.

I only have up to 2014. Don’t have any other other years.

[egleaves_imp]

Egleaves, Does your diagram have page numbers on it? What are they?

Example 20-5

I ask as in the service manual they do not reference bikes by 1100E or 1100SA. Just CB1100 ‘13 model, or CB1100A after ‘13 model. That would be the deluxe as in ‘14 it was the only ABS model. I’m not sure what E model is, although Cormanus posted a list somewhere.

I only have up to 2014. Don’t have any other other years.

It has 20-5 on the lower left and 20-4 lower right.

[Lord Popgun]

That diagram is not correct as I noted above. Max combined 2 different diagrams by mistake. I’m sure he will correct them as soon as he finds out.

Is your bike a 2014 standard (non ABS) or a DLX. The DLX has 2 mufflers and ABS (sensor ring on front and back).

[egleaves_imp]

That diagram is not correct as I noted above. Max combined 2 different diagrams by mistake. I’m sure he will correct them as soon as he finds out.

Is your bike a 2014 standard (non ABS) or a DLX. The DLX has 2 mufflers and ABS (sensor ring on front and back).

Standard....no ABS.

[Lord Popgun]

Egleaves, Check your PM

[max]

guys i just checked my left and right pictures and the now famous pink/green wire does simply not exist on the right page, it just stops on the left one.
normally not an issue until i stitched them together, what can we do?

[Cormanus]

CB1100A is likely the 2010 model. 2014 is CB1100E.

[Lord Popgun]

Max, I am going to send them both the 2 proper scans. You just need to put the proper scans together. You got them mixed up. If you still have them, the file names should allow you to get the right ones matched up.

Or email me and I’ll re-send them.

[peterbaron]

CB1100A is likely the 2010 model. 2014 is CB1100E.

This mayn't be quite correct, in Canada, when I bought my 2013 CB1100 ABS, it was 2013 CB1100A...but it is possible that 2010-2013 were called CB1100A..with or without ABS , for 100% sure 2013 CB1100 A in Canada was ABS

[Cormanus]

You may well be right, Peterbaron, although the letter at the end usually denotes the year. However, some of the usuage seems to be at the discretion of national distributors. Honda Australia called my 2011 the CB1100B