Experience with hyperlites anyone?

[Elipten_imp]

Any personal experience with installing or using hyperlites or similar product?

All information welcome.


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

[TINK_imp]

Any personal experience with installing or using hyperlites or similar product?

All information welcome.


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

I've put Hyperlites on several bikes over the years. Instructions are easy to follow. They R E A L L Y catch your eye when they go off. It's a good idea to install them in this age of cell phone distracted cage drivers.

[HikerToo_imp]

what are they?

[Elipten_imp]

Super brite led flashing brake lights that you add to bike. Also turn signals and white lights for front

Google hyperlites


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk
Any tips think on wiring them to the CB1100?


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

[the Ferret]

Ive seen them on some members of the ST 1300 forum bikes. They are awesome. The ones I saw were rectangular with maybe a dozen led bulbs and flashed brightly when the brakes were hit. Look like they would add a lot of safety to the bike.

[thumper_imp]

I've never used Hyperlites, but every one of my bikes for about the past 10 years has had a Whelen LIN3 LED light put on the back as a flashing brakelight.

Picture in Post #2 of this thread:

http://cb1100forum.com/forum/showthread....177#pid177

http://www.sirennet.com/whrs-02zcr.html

About $55.

[CBXBob_imp]

Have the rear HYPERLITES. Had on my Bandit. Just installed on the CB. Tapped into wires in rear tail light bracket. A little tight. Not much info found on front Hyper Lites White.

[Elipten_imp]

How did you tap? Did you use posi taps or cut and solder?


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

[CBXBob_imp]

I used positaps.Not enough room to cut and solder. Tried to download photo from phone but it didn't work. Sorry. Also added the Black Backoff led tail/brake light license plate frame. Used only the single row one, the dual row top led bar blocks the license plate light. I only hooked up the flasher module to the Hyperlites.

[dBuster_imp]

I used positaps.Not enough room to cut and solder. Tried to download photo from phone but it didn't work. Sorry. Also added the Black Backoff led tail/brake light license plate frame. Used only the single row one, the dual row top led bar blocks the license plate light. I only hooked up the flasher module to the Hyperlites.

Looking forward to a photo or video of how yours works!

Sent from my XT1055 using Tapatalk