The CB1100 Community Forum

Any personal experience with installing or using hyperlites or similar product?

All information welcome.


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

(01-24-2014, 06:41 AM)Elipten_imp Wrote: [ -> ]Any personal experience with installing or using hyperlites or similar product?

All information welcome.


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

I've put Hyperlites on several bikes over the years. Instructions are easy to follow. They R E A L L Y catch your eye when they go off. It's a good idea to install them in this age of cell phone distracted cage drivers.

what are they?

Super brite led flashing brake lights that you add to bike. Also turn signals and white lights for front

Google hyperlites


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk
Any tips think on wiring them to the CB1100?


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

Ive seen them on some members of the ST 1300 forum bikes. They are awesome. The ones I saw were rectangular with maybe a dozen led bulbs and flashed brightly when the brakes were hit. Look like they would add a lot of safety to the bike.

I've never used Hyperlites, but every one of my bikes for about the past 10 years has had a Whelen LIN3 LED light put on the back as a flashing brakelight.

Picture in Post #2 of this thread:

http://cb1100forum.com/forum/showthread....177#pid177

http://www.sirennet.com/whrs-02zcr.html

About $55.

Have the rear HYPERLITES. Had on my Bandit. Just installed on the CB. Tapped into wires in rear tail light bracket. A little tight. Not much info found on front Hyper Lites White.

How did you tap? Did you use posi taps or cut and solder?


Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk

I used positaps.Not enough room to cut and solder. Tried to download photo from phone but it didn't work. Sorry. Also added the Black Backoff led tail/brake light license plate frame. Used only the single row one, the dual row top led bar blocks the license plate light. I only hooked up the flasher module to the Hyperlites.

(01-27-2014, 11:40 AM)CBXBob_imp Wrote: [ -> ]I used positaps.Not enough room to cut and solder. Tried to download photo from phone but it didn't work. Sorry. Also added the Black Backoff led tail/brake light license plate frame. Used only the single row one, the dual row top led bar blocks the license plate light. I only hooked up the flasher module to the Hyperlites.

Looking forward to a photo or video of how yours works!

Sent from my XT1055 using Tapatalk