The CB1100 Community Forum / Honda CB1100 Discussions / Accessories/Modifications v
Genmar Risers Added

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Genmar Risers Added
Author Message
Mscb1100_imp Offline
Been There


Posts: 337
Threads: 49
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jul 2017
Genmar Risers Added
#1

These helped move bars up an inch and back about 1 3/8 inch.
Seating position is more upright and neutral now


10-30-2017, 12:14 PM
Find Reply
Spiderwatts_imp Offline
First Service Completed


Posts: 31
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2017
RE: Genmar Risers Added
#2

(10-30-2017, 12:14 PM)Mscb1100_imp Wrote: These helped move bars up an inch and back about 1 3/8 inch.
Seating position is more upright and neutral now

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.


12-04-2017, 09:18 PM
Find Reply
Mscb1100_imp Offline
Been There


Posts: 337
Threads: 49
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jul 2017
RE: Genmar Risers Added
#3

(12-04-2017, 09:18 PM)Spiderwatts_imp Wrote:
(10-30-2017, 12:14 PM)Mscb1100_imp Wrote: These helped move bars up an inch and back about 1 3/8 inch.
Seating position is more upright and neutral now

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.
go to genmar webpage
It is part # x102 for aluminum

part # 102b for black

they are 1 inch up and 1 3/8 inch back

I used stock cables and wiring, did not have to make any modifications.

PS, you will need to go by Honda to get two more caps, they are about 1.19 a piece


12-05-2017, 03:51 AM
Find Reply
Scooter12_imp Offline
First Service Completed


Posts: 15
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2017
RE: Genmar Risers Added
#4

I put the same ones on my 2014 Standard this summer. Instant improvement, took the pressure off of my hands and I sit more upright. The only down side is that now when I turn hard left my tank bag hits the horn button. Startles me every time.


12-05-2017, 05:29 AM
Find Reply
CA200_imp Offline
Been There


Posts: 641
Threads: 42
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
RE: Genmar Risers Added
#5

I used the same model riser on 2013 and did have to replace the brake line with a longer one.


12-05-2017, 06:29 AM
Find Reply
Spiderwatts_imp Offline
First Service Completed


Posts: 31
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2017
RE: Genmar Risers Added
#6

(12-05-2017, 03:51 AM)Mscb1100_imp Wrote:
(12-04-2017, 09:18 PM)Spiderwatts_imp Wrote:
(10-30-2017, 12:14 PM)Mscb1100_imp Wrote: These helped move bars up an inch and back about 1 3/8 inch.
Seating position is more upright and neutral now

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.
go to genmar webpage
It is part # x102 for aluminum

part # 102b for black

they are 1 inch up and 1 3/8 inch back

I used stock cables and wiring, did not have to make any modifications.

PS, you will need to go by Honda to get two more caps, they are about 1.19 a piece

If you would please tell me what exact model# you ordered. I had looked awhile back and could not find them. Were you able to use all stock cables and lines after install? Thank you in advance for your assistance.
go to genmar webpage
It is part # x102 for aluminum

part # 102b for black

they are 1 inch up and 1 3/8 inch back

I used stock cables and wiring, did not have to make any modifications.

PS, you will need to go by Honda to get two more caps, they are about 1.19 a piece
Thank you!!


12-05-2017, 10:54 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  VOIGT Risers Duderino_imp 3 331 11-23-2024, 01:09 AM
Last Post: Obleo
  Handlebar Risers?? bubblerboy64_imp 16 1,078 07-16-2022, 06:04 AM
Last Post: calipo223_imp
  ROX Risers and longer brake line? MrBob_imp 3 318 06-14-2021, 12:19 AM
Last Post: MrBob_imp
  Rizoma risers on the cb1100 Zee9_imp 20 1,126 05-28-2021, 02:20 PM
Last Post: Zee9_imp
  HANDLEBAR RISERS - is really necessary??? Alfgaxatico_imp 19 1,046 12-16-2020, 10:40 PM
Last Post: GoldOxide_imp
  Added new Honda Travel Rack (2014 DLX) MWV1500_imp 13 756 11-24-2019, 06:31 AM
Last Post: Cormanus
  Handlebar risers johan_imp 1 165 05-26-2019, 01:08 AM
Last Post: peterbaron
  GENMAR customer service? Skypilot_imp 7 499 05-08-2019, 10:37 PM
Last Post: Skypilot_imp
  No more GENMAR risers so now what options? Skypilot_imp 21 1,150 05-08-2019, 12:34 PM
Last Post: WRXer_imp
  handlebar risers terrydlargo_imp 20 1,117 04-02-2019, 10:54 AM
Last Post: flynrider

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | CB1100 Forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication