Login

DAC · 07-20-2023, 12:12 PM

Well, gonna probably trailer down to the Rally in Blueville this year. I have a good friend, Goldwing Dave, who will supply the covered trailer, just need a chock.

What do you all recommend for a good chock for the CB? I see the Condor comes well recommended. Any other good options?

Thanks!

Mtneers · 07-20-2023, 09:30 PM

Check messages….

Sent from my iPad using Tapatalk

rickcb · 07-21-2023, 04:25 AM

(07-20-2023, 12:12 PM)DAC_imp Wrote: Well, gonna probably trailer down to the Rally in Blueville this year. I have a good friend, Goldwing Dave, who will supply the covered trailer, just need a chock.

What do you all recommend for a good chock for the CB? I see the Condor comes well recommended. Any other good options?

Thanks!

Love the Condor.

the Ferret · 07-21-2023, 05:10 AM

Just be sure and still strap the bike down. Guy showed up at the dealer the other day with a CB500X Honda in an enclosed trailer. He rolled it up in the condor and closed the back and took off. When he got to the shop the bike was lying on it's side in the trailer.

emptysea · 07-21-2023, 12:50 PM

Condor

PowerDubs_imp · 07-22-2023, 12:57 AM

Is this what you guys are referencing?

https://www.condor-lift.com/product/pit-...t-ps-1500/

I have 2 of these-

https://www.ebay.com/itm/171362987461

Work great. Very happy with them.

DAC · 07-22-2023, 07:27 AM

(07-21-2023, 05:10 AM)The ferret_imp Wrote: Just be sure and still strap the bike down. Guy showed up at the dealer the other day with a CB500X Honda in an enclosed trailer. He rolled it up in the condor and closed the back and took off. When he got to the shop the bike was lying on it's side in the trailer.

Oh, for sure. Thanks.

The beauty of the CB is the multiple tie-down options, especially with a luggage rack installed. I've never trailered this bike but I expect to tie it down by the bars as well as the rack and crank the suspension down a bit.

David

The Gecko_imp · 07-22-2023, 07:57 AM

Much more important, do NOT let the bike rest on side stand
or center stand. A rail keeps the bike aligned (longitudinal),
straps keep it in place.

DAC · 07-22-2023, 10:23 AM

(07-22-2023, 07:57 AM)The Gecko_imp Wrote: Much more important, do NOT let the bike rest on side stand
or center stand. A rail keeps the bike aligned (longitudinal),
straps keep it in place.

I've asked that very question and got the same answer! Thanks for the confirmation!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	An update on my spoke wheel conversion.	FLYTYM_imp	20	1,199	06-17-2023, 02:09 AM Last Post: FLYTYM_imp
	Wire Wheel / Cast Wheel Swap	pekingduck	37	2,495	06-05-2020, 12:35 PM Last Post: michael1954
	Houtman's new wheel chock	The A-man	14	1,014	07-04-2019, 07:05 AM Last Post: Houtman_imp
	modifying wheel trim	misterprofessionality	18	1,360	05-14-2019, 02:49 PM Last Post: Cormanus
	cb1100 RS wheel conversion	misterprofessionality	34	2,407	04-26-2019, 03:59 PM Last Post: Cormanus
	Another question about the spoke wheel conversion.	FLYTYM_imp	2	329	05-14-2018, 03:34 PM Last Post: Cormanus
	17" Wheel Conversion	mjezek_imp	38	2,449	12-24-2017, 03:00 AM Last Post: peterbaron
	Another 17" Wheel Convert	chync_imp	17	1,192	05-14-2017, 01:18 PM Last Post: Aussieflyer
	Stripping wheel lips	PowerDubs_imp	6	500	04-05-2017, 09:25 AM Last Post: TINK_imp
	Mag Wheel	736cc_imp	7	527	07-25-2016, 04:54 AM Last Post: dsinned_imp

Threaded Mode Wheel Chocks
Author	Message