Posts: 23,469
Threads: 697
Likes Received: 579 in 260 posts
Likes Given: 757
Joined: Apr 2025
(07-29-2014, 06:55 PM)rmack_imp Wrote: I have watched these oil threads for so long and here is my 2 bobs worth, use Honda hp4 10w 30 and that's it rain hail or shine end of story all this nonsense I here all day long at work plain and simple use hp4.
Weekly we service so many Honda machines from race bikes / mx bikes etc you will find gear changing etc miles ahead with this stuff Honda didn't just decide hay we will sell this stuff and se how it goes
well, that would make for some pretty boring oil threads now, wouldn't it?
Posts: 16,287
Threads: 347
Likes Received: 839 in 462 posts
Likes Given: 973
Joined: Apr 2025
10w30? What? Are you mad? Its 20w50 or nothing.
Posts: 915
Threads: 66
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2014
OMG! OMG! OMG! Another amazing thread!
Posts: 1,268
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
(11-22-2013, 04:16 AM)_imp Wrote: (11-22-2013, 04:05 AM)CIP57_imp Wrote: Capacity is 5.2
oil change is 4.1
I'm thinking a qt gets hung up in there.
I take it yer using the { after disassembly } spec.
Which means I have to find out how the oil is circulated.
In order for an Oil cooler to be effective it has to circulate the
engine oil.If about a quart remains in the oil cooler unit than
that really screws up using a synthetic.I just got thru buying
4 quarts of Amsoil 10w-40 at the Honda dealer I bought the bike.
It's a newer Amsoil made especially for metrics and wet clutches.
I need this issue addressed.No way can I mix a full synthetic
10w-40 with the assembled 10w-30 petroleum.
1. You're obsessing over nothing.
2. You're believing things you read on the internet.
3. A little knowledge can be dangerous.
Posts: 23,469
Threads: 697
Likes Received: 579 in 260 posts
Likes Given: 757
Joined: Apr 2025
Lol Foolardi is still irritating people a year after he was banned.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
Classic,
Foolardi was banned a long time ago...
Posts: 1,268
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
Posts: 915
Threads: 66
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2014
Too good. I guess synthetic blend is a blend of synthetics
When I've been low on cash, I've used a ratio of one quart syn to two quarts Dino. Read an ashrae
paper that determined you could still get a lot of benefit from the syn by doing it that way.
I've mixed and matched oils all the time for years with no negatives.
As long as one is using properly rated lubes everything should be fine.
I've even used 0w20 in my '01 FZ1. It's got 70k on it with never an issue. I change oil once a year regardless of miles.
Posts: 2,290
Threads: 75
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Aug 2013
^^^^^^ +1. Mate, some sense. Never thought I'd see that on an oil thread.
Cheers
