Login

Olyrider · 05-01-2016, 01:59 PM

https://spieglerusa.com/brakes/brake-lin...rvoir.html

Clutch and brake reservoir

Lord Popgun · 05-01-2016, 09:37 PM

How do you hook that into the type actuator/reservoir we have?

kmoney_imp · 05-01-2016, 09:49 PM

(05-01-2016, 09:37 PM)Lord Popgun_imp Wrote: How do you hook that into the type actuator/reservoir we have?

That's what I was thinking too, you'd need master cylinders without integral resivoirs. It's possible, but I don't think it's really practical on the CB.

kennyw · 05-02-2016, 12:52 AM

Easy to do if you get a new master cylinder too. That is not going to be plug and play, mostly custom work.

Ulvetanna_imp · 05-02-2016, 01:51 AM

(05-01-2016, 09:37 PM)Lord Popgun_imp Wrote: How do you hook that into the type actuator/reservoir we have?

You don't. The m/c's and reservoirs are an integrated unit. Needs both clutch and brake m/c's of the type that require a separate reservoir. Quite expensive, no benefit at all. Also must be very careful to get the piston sizing and lever ratios correct or clutch/brake action could be very wrong, and perhaps dangerous.

Get a nice pipe or something, maybe?

Olyrider · 05-02-2016, 02:38 AM

OK, you guys convinced me !!!

Since I have no mechanical aptitude, I naively thought "plug & play". Apparently not!

So that just becomes margarita money instead. I'm OK with that.

Thanks for the useful info!!

Rocky_imp · 05-02-2016, 03:17 AM

No disrespect or offence intended, but I have to wonder why you thought of doing this in the first place. Huh

Olyrider · 05-02-2016, 03:58 AM

No more reason than I liked the look.

Someone posted a photo of a cafe'd CB1100 the other day with them mounted. Looked cool! That's why. Plug & play...I'd be there.

Rocky_imp · 05-02-2016, 04:44 AM

(05-02-2016, 03:58 AM)Olyrider_imp Wrote: No more reason than I liked the look.

Someone posted a photo of a cafe'd CB1100 the other day with them mounted. Looked cool! That's why. Plug & play...I'd be there.

OK, understood, that's cool Thumbs Up

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Is the 2014 Deluxe seat a unique size and/or fit?	LucienLeFranc	12	231	03-29-2026, 10:31 PM Last Post: LucienLeFranc
	Tube type/size	KubaGrom_imp	12	695	02-27-2023, 02:44 PM Last Post: Mafd2_imp
	Wheel Size Change Saga and Amazing/Rare Customer Service from a Vendor	chync_imp	4	269	03-12-2018, 08:27 AM Last Post: PowerDubs_imp
	Tire Size Question.	BackroadsRider_imp	3	285	09-29-2017, 07:37 AM Last Post: BackroadsRider_imp
	The right size saddlebags	the Ferret	117	4,950	06-17-2017, 03:42 AM Last Post: ChiefJP_imp
	Thread size and pitch of our oil filer caps.	kmoney_imp	3	247	01-26-2016, 12:05 PM Last Post: kmoney_imp
	Givi Box Size For CB1100?	sourdough44_imp	29	1,261	06-20-2015, 08:20 PM Last Post: Cormanus
	What size tires are you running?	Ferrealls_imp	4	308	05-29-2015, 02:15 PM Last Post: rboe
	Grab on grips: need size	walrusz06_imp	7	395	05-13-2015, 07:46 PM Last Post: Cormanus
	ECU reflash for tire size change?	eakngcobra_imp	1	144	08-09-2014, 11:01 PM Last Post: CIP57_imp

Threaded Mode I want to do this to my bike, but I can't determine the right size...
Author	Message