Login

**Cormanus** · 05-14-2019, 10:42 AM

Ah. Apologies. Missed that.

GoldOxide_imp · 05-14-2019, 11:17 AM

(05-14-2019, 10:32 AM)Townie_imp Wrote: If things go awry with the paint stripper & grinder, and you're going to replace the cast wheels, the 2014 Canadian standard had what you're after, black centers with silver rims. Expensive option though.

Great snap Townie.

Lord Popgun · 05-14-2019, 11:26 AM

Cormanus, the rear axle size is different on ‘13 and ‘14.

Townie, are the headers stainless or chrome?

GoldOxide_imp · 05-14-2019, 11:27 AM

They are SS.

Townie_imp · 05-14-2019, 11:28 AM

Quote:Great snap Townie.
Thanks GO. There have been a couple mods that add some visual appeal (fork boots & Staintune), I should probably take another picture when I think of it.

(05-14-2019, 11:26 AM)Lord Popgun_imp Wrote: Cormanus, the rear axle size is different on ‘13 and ‘14.

Townie, are the headers stainless or chrome?

Stainless (single walled). That photo was taken after a good cleaning with Optiglanz.

Lord Popgun · 05-14-2019, 12:17 PM

Wow, zoom in on the picture and you can read the stripper can brand and product name, the exact brushes (or just get cheap ones at Home Depot).

The tape appears to be 3M Performance Yellow masking tape. Google it.

misterprofessionality · 05-14-2019, 12:56 PM

(05-14-2019, 12:17 PM)Lord Popgun_imp Wrote: Wow, zoom in on the picture and you can read the stripper can brand and product name, the exact brushes (or just get cheap ones at Home Depot).

The tape appears to be 3M Performance Yellow masking tape. Google it.

I can read that, but i'm more concerned with whether or not he ended up using that stripper in the end. reading the thread it seems like he was commenting on how it doesn't work fast enough. when he posts again it seems like he's using a different stripper. could be wrong

GoldOxide_imp · 05-14-2019, 01:06 PM

Never realized Honda put black enamel on some rim configurations right to the tire sidewall.

**Cormanus** · 05-14-2019, 02:49 PM

(05-14-2019, 11:26 AM)Lord Popgun_imp Wrote: Cormanus, the rear axle size is different on ‘13 and ‘14.

Townie, are the headers stainless or chrome?

Geez, I'm apologising all over the place on this thread. The '13 wheels wouldn't be a lot of use then.

(05-14-2019, 12:56 PM)misterprofessionality_imp Wrote:
(05-14-2019, 12:17 PM)Lord Popgun_imp Wrote: Wow, zoom in on the picture and you can read the stripper can brand and product name, the exact brushes (or just get cheap ones at Home Depot).

The tape appears to be 3M Performance Yellow masking tape. Google it.

I can read that, but i'm more concerned with whether or not he ended up using that stripper in the end. reading the thread it seems like he was commenting on how it doesn't work fast enough. when he posts again it seems like he's using a different stripper. could be wrong

I think he did use it but was disappointed it didn't work more quickly.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Wheel Chocks	DAC	8	654	07-22-2023, 10:23 AM Last Post: DAC
	An update on my spoke wheel conversion.	FLYTYM_imp	20	1,016	06-17-2023, 02:09 AM Last Post: FLYTYM_imp
	Wire Wheel / Cast Wheel Swap	pekingduck	37	1,943	06-05-2020, 12:35 PM Last Post: michael1954
	Houtman's new wheel chock	The A-man	14	835	07-04-2019, 07:05 AM Last Post: Houtman_imp
	cb1100 RS wheel conversion	misterprofessionality	34	1,806	04-26-2019, 03:59 PM Last Post: Cormanus
	Spoke wheel conversion on a 2014 Standard	FLYTYM_imp	5	494	03-13-2019, 12:29 PM Last Post: GoldOxide_imp
	Another question about the spoke wheel conversion.	FLYTYM_imp	2	274	05-14-2018, 03:34 PM Last Post: Cormanus
	17" Wheel Conversion	mjezek_imp	38	1,944	12-24-2017, 03:00 AM Last Post: peterbaron
	Another 17" Wheel Convert	chync_imp	17	966	05-14-2017, 01:18 PM Last Post: Aussieflyer
	Stripping wheel lips	PowerDubs_imp	6	410	04-05-2017, 09:25 AM Last Post: TINK_imp

Threaded Mode modifying wheel trim
Author	Message