![]() |
|
Any suggestions on shorter aftermarket shock? - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Any suggestions on shorter aftermarket shock? (/showthread.php?tid=8647) |
Any suggestions on shorter aftermarket shock? - FLYTYM_imp - 05-21-2018 I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct? RE: Any suggestions on shorter aftermarket shock? - Lord Popgun - 05-22-2018 This thread, first post, mentions using Triumph shocks. http://cb1100forum.com/forum/showthread.php?tid=9190 On the second page of the thread lowering links and a source are mentioned. I think a few members have used the Triumph shocks but I didn’t feel like reading all the search results
Any suggestions on shorter aftermarket shock? - beardyweirdy@me.com_imp - 05-22-2018 Might be worth working out the ideal length of shock you need and asking a manufacturer what they have that will fit our bikes. Hagon in the uk have been very helpful to me and I know they have an outlet in Cali. Could save you a lot of sucking and seeing... Sent from my iPhone using Tapatalk RE: Any suggestions on shorter aftermarket shock? - jtopiso_imp - 05-22-2018 (05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct? A good damper/suspension expert might be able to shorten the original damper rods and provide matching springs. RE: Any suggestions on shorter aftermarket shock? - Desert viper_imp - 01-30-2019 (05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 (05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 RE: Any suggestions on shorter aftermarket shock? - pekingduck - 01-30-2019 Stock 2013 CB1100 shocks are 360mm eye-to-eye length. There's no shortage of used 340mm long Bonneville (pre-2016) shocks out there. I've actually used them on several other bikes with fine results. I've bought them for as little as $30/pair. The lower rubber bushing on the CB1100 is a larger ID than the top as I recall, and that's not normal so you may have to swap some bushings around. I have a pair of 365mm Triumph Thruxton (pre-2016) shocks on my 2004 Bonnie and they improve the Bonnie's handling markedly. I might try them on the CB1100. It would be difficult to take the stock shocks apart because there should be a jam nut above the rubber bumper, all covered by the shroud. RE: Any suggestions on shorter aftermarket shock? - FLYTYM_imp - 01-30-2019 (01-30-2019, 02:05 PM)Desert viper_imp Wrote:I just emailed you about some ICON 7610(05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 (05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 No email received. RE: Any suggestions on shorter aftermarket shock? - Desert viper_imp - 01-30-2019 (01-30-2019, 05:48 PM)FLYTYM_imp Wrote:I just emailed you about some ICON 7610(01-30-2019, 02:05 PM)Desert viper_imp Wrote:I just emailed you about some ICON 7610(05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 (05-21-2018, 09:34 PM)FLYTYM_imp Wrote: I plan on lowering the back of this bike a lot and need some shock suggestions,I believe the stock length is 340MM correct?I just emailed you about some ICON 7610 No email received. pm sent to you. |