+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Ignition Starter 2017 on 2013 Bike (/showthread.php?tid=8144)
Ignition Starter 2017 on 2013 Bike - cb1100_dude_imp - 02-06-2019
Hello,
Does anyone know if a 2017 ignition key starter will fit on a CB1100?
Looking to buy a new 2017 with matching gas cap so I can only use one key for my 2013 bike with the newer gas tank.
Thank you!
L
RE: Ignition Starter 2017 on 2013 Bike - SportsterDoc - 02-06-2019
They are different part numbers, but I do not know what the difference(s) may be
https://www.hondapartshouse.com/oemparts/a/hon/5907904187a8660d54fac370/handlebar-top-bridge
https://www.hondapartshouse.com/oemparts/a/hon/511a8d99f870022e4ccd324c/handlebar-top-bridge
RE: Ignition Starter 2017 on 2013 Bike - cb1100_dude_imp - 02-06-2019
(02-06-2019, 01:48 AM)SportsterDoc_imp Wrote: They are different part numbers, but I do not know what the difference(s) may be
https://www.hondapartshouse.com/oemparts/a/hon/5907904187a8660d54fac370/handlebar-top-bridge
https://www.hondapartshouse.com/oemparts/a/hon/511a8d99f870022e4ccd324c/handlebar-top-bridge
Thanks for the response! Yes they're for sure different parts. I did reach out to Takase-San from Samurider and he was not able to offer additional info in terms of fit
RE: Ignition Starter 2017 on 2013 Bike - SportsterDoc - 02-06-2019
Not seeing any discernible difference in the parts sketches.
Is it possible that the key type is the only difference?
Does 2017 have the laser cut type of key?
RE: Ignition Starter 2017 on 2013 Bike - pekingduck - 02-06-2019
Starting around 2015-2016, many Hondas went to the wave-cut or laser-cut style key. Africa Twins, CBR650F, VFR1200, CBR500R and CB1100. So the question becomes, will the ignition switch of a 2017 fit earlier models?
I should add that if you are ordering the 2017 switch set, the helmet/seat locks will not interchange, so you'd still have to carry a separate key.
RE: Ignition Starter 2017 on 2013 Bike - GoldOxide_imp - 02-06-2019
(02-06-2019, 02:17 AM)SportsterDoc_imp Wrote: Not seeing any discernible difference in the parts sketches.
Is it possible that the key type is the only difference?
Does 2017 have the laser cut type of key?
I think the housings are different. But what about the tumbler inside?
RE: Ignition Starter 2017 on 2013 Bike - Houtman_imp - 02-06-2019
It will be cheaper and easier to just use two different keys.
RE: Ignition Starter 2017 on 2013 Bike - SportsterDoc - 02-06-2019
(02-06-2019, 06:14 AM)GoldOxide_imp Wrote:(02-06-2019, 02:17 AM)SportsterDoc_imp Wrote: Not seeing any discernible difference in the parts sketches.
Is it possible that the key type is the only difference?
Does 2017 have the laser cut type of key?
I think the housings are different. But what about the tumbler inside?
Side by side very helpful!
RE: Ignition Starter 2017 on 2013 Bike - peterbaron - 02-06-2019
(02-06-2019, 01:33 AM)cb1100_dude_imp Wrote: Hello,
Does anyone know if a 2017 ignition key starter will fit on a CB1100?
Looking to buy a new 2017 with matching gas cap so I can only use one key for my 2013 bike with the newer gas tank.
Thank you!
L
From the pics of '13 & '17, blank keys look different and have different part numbers. You may want to talk to your local locksmith and show him both key$.
He will have to play with pin tumblers and deal with : ignition cylinder, gas cap and seat lock, some limitations apply.
In automotive business, we use locksmith skills to fit an old key with new ignition switch ass-y/locks, so the customer still has the original keys that operate all locks/ign. switch ass-y...
Slim chance if the keys are different, check.
RE: Ignition Starter 2017 on 2013 Bike - pekingduck - 02-06-2019
Keys are different.