The CB1100 Community Forum
Torque Settings - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Torque Settings (/showthread.php?tid=6151)

Pages: 1 2

Torque Settings - Tyke57nz_imp - 12-25-2013

Hi

I would like to know the Torque settings for the Engine Mounting M10 bolts that are at the front of the Engine under the Oil Cooler. Long story involving engine sliders/brackets that didn`t quite fit properly so the original bolts have gone back in until I either make new spacers or the slider manufacturer supplies them.
Also looking to buy or download a workshop manual for my CB1100 if anyone can point me in the right direction.

Have a safe and happy New Year,

Cheers

RE: Torque Settings - Kiwikevin_imp - 12-25-2013

Hi Tyke57NZ

Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here http://www.sell.com/2G7335

RE: Torque Settings - Tyke57nz_imp - 12-26-2013

(12-25-2013, 08:19 PM)Kiwikevin_imp Wrote: Hi Tyke57NZ

Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here http://www.sell.com/2G7335
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers

Torque Settings - Cormanus - 12-26-2013

Workshop manuals and sourcing them was discussed here, http://cb1100forum.com/forum/archive/index.php?thread-18-1.html.

Kiwikevin, is the one from sell.com ok?

RE: Torque Settings - Tyke57nz_imp - 12-26-2013

(12-26-2013, 06:33 AM)Cormanus_imp Wrote: Workshop manuals and sourcing them was discussed here, http://cb1100forum.com/forum/archive/index.php?thread-18-1.html.

Kiwikevin, is the one from sell.com ok?

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.

RE: Torque Settings - Kiwikevin_imp - 12-26-2013

(12-26-2013, 06:58 AM)Tyke57nz_imp Wrote:
(12-26-2013, 06:33 AM)Cormanus_imp Wrote: Workshop manuals and sourcing them was discussed here, http://cb1100forum.com/forum/archive/index.php?thread-18-1.html.

Kiwikevin, is the one from sell.com ok?

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.
Hi Guys, yes good quality print, bound with clear plastic cover!
I'm Happy!

RE: Torque Settings - Tyke57nz_imp - 12-26-2013

(12-26-2013, 08:00 AM)Kiwikevin_imp Wrote:
(12-26-2013, 06:58 AM)Tyke57nz_imp Wrote:
(12-26-2013, 06:33 AM)Cormanus_imp Wrote: Workshop manuals and sourcing them was discussed here, http://cb1100forum.com/forum/archive/index.php?thread-18-1.html.

Kiwikevin, is the one from sell.com ok?

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.
Hi Guys, yes good quality print, bound with clear plastic cover!
I'm Happy!

Went to the Helm site and its US$127 to post to NZ, total cost US$222 so might be going with the sell.com item, from the thread I believe its an OK item but perhaps Kiwikevin would confirm.
Hi Guys, yes good quality print, bound with clear plastic cover!
I'm Happy!
Cheers for that, off for a ride now before the weather turns grotty.

RE: Torque Settings - AzBob_imp - 12-26-2013

The sell.com one may be "OK" but it's a totally illegal copy some guy is printing in his basement.

RE: Torque Settings - Kiwikevin_imp - 12-26-2013

(12-26-2013, 06:06 AM)Tyke57nz_imp Wrote:
(12-25-2013, 08:19 PM)Kiwikevin_imp Wrote: Hi Tyke57NZ

Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here http://www.sell.com/2G7335
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Yes torques are the same for the 4 bolts that go through the frame. The other 2 (1 each side) that go through the front engine bracket/s are 59Nm.

Hope this helps.

RE: Torque Settings - Tyke57nz_imp - 12-27-2013

(12-26-2013, 04:52 PM)Kiwikevin_imp Wrote:
(12-26-2013, 06:06 AM)Tyke57nz_imp Wrote:
(12-25-2013, 08:19 PM)Kiwikevin_imp Wrote: Hi Tyke57NZ

Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here http://www.sell.com/2G7335
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Yes torques are the same for the 4 bolts that go through the frame. The other 2 (1 each side) that go through the front engine bracket/s are 59Nm.

Hope this helps.
Hi Kiwikevin

Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Yes torques are the same for the 4 bolts that go through the frame. The other 2 (1 each side) that go through the front engine bracket/s are 59Nm.

Hope this helps. Excellent, thanks for the info. I will get the manual from sell.com as it is $200+ cheaper landed at my door; US$157 just for shipping and handling seems a little over the top for a manual.