The CB1100 Community Forum
6mm Torx Wrench - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: 6mm Torx Wrench (/showthread.php?tid=5982)

Pages: 1 2

6mm Torx Wrench - CB4ME_imp - 08-11-2014

The front disk brakes on the non-ABS model use five 6mm x 18mm Torex bolts. I want to remove the bolts to pull the collars and paint the collars gold - or find someone that will anodyze them.

Any suggestions for finding a 6mm Torex wrench? I'm reluctant to use a Torex bit. I think the bolts will require some force to remove and I'd like a solid one piece wrench - think hex wrenches. I don't want to bugger them up.

I've found torex wrench sets but they are on the pricy side and all I'll ever need is a 6mm Torx.

I tried some auto supply dealers, no luck.

Thanks in advance for your help

RE: 6mm Torx Wrench - the Ferret - 08-11-2014

did you try sears if not them try McMaster-Carr

http://www.mcmaster.com/#torx-keys/=t8l2e5

RE: 6mm Torx Wrench - A440_imp - 08-11-2014

(08-11-2014, 07:42 AM)CB4ME_imp Wrote: The front disk brakes on the non-ABS model use five 6mm x 18mm Torex bolts. I want to remove the bolts to pull the collars and paint the collars gold - or find someone that will anodyze them.

Any suggestions for finding a 6mm Torex wrench? I'm reluctant to use a Torex bit. I think the bolts will require some force to remove and I'd like a solid one piece wrench - think hex wrenches. I don't want to bugger them up.

I've found torex wrench sets but they are on the pricy side and all I'll ever need is a 6mm Torx.

I tried some auto supply dealers, no luck.

Thanks in advance for your help

I've used this type with a socket wrench. I know this qualifies as a "bit" but it is permanently embedded in the socket.
http://www.homedepot.com/p/Husky-T30-3-8-in-Drive-Torx-Bit-Socket-H3DHBST30/202913546

RE: 6mm Torx Wrench - Houtman_imp - 08-11-2014

Have you tried NAPA stores ?
Other wise Google the size and some supplier will just sell that size but the shipping could perhaps cost more than just buying a set locally.

6mm Torx Wrench - grover_imp - 08-11-2014

You can get the Craftsman torx sockets at Sears, but unfortunately you have to buy the whole set...that's what I had to do a few years back


Sent from my iPhone using Tapatalk

RE: 6mm Torx Wrench - Jayimpalaman_imp - 08-11-2014

(08-11-2014, 07:42 AM)CB4ME_imp Wrote: The front disk brakes on the non-ABS model use five 6mm x 18mm Torex bolts. I want to remove the bolts to pull the collars and paint the collars gold - or find someone that will anodyze them.

Any suggestions for finding a 6mm Torex wrench? I'm reluctant to use a Torex bit. I think the bolts will require some force to remove and I'd like a solid one piece wrench - think hex wrenches. I don't want to bugger them up.

I've found torex wrench sets but they are on the pricy side and all I'll ever need is a 6mm Torx.

I tried some auto supply dealers, no luck.

Thanks in advance for your help
They come off fairly easy. Go to Harbor f. or Walmart. The size you will be using will be a 3/8 drive. easy, Easy.. Jayimpalaman

RE: 6mm Torx Wrench - Tyke57nz_imp - 08-11-2014

Torx socket is a T30 and recommended torque is 15lb/ft which is not going to require a huge amount of effort to undo. Over the years I have bought Koken seperately at no great cost.

RE: 6mm Torx Wrench - CB4ME_imp - 08-11-2014

Thanks everyone! Great information. Order placed with McMaster-Carr

RE: 6mm Torx Wrench - Houtman_imp - 08-12-2014

An other good place to buy individual sockets etc. etc. is
MSC Industrial Supply. mscdirect.com
I have bought many "odd" size sockets from them and you can pick the quality you want.
I bought many Pronto sockets and happy with the quality of them.

RE: 6mm Torx Wrench - Ole - 08-12-2014

I put my torx bits in a 1/4" socket
works great