+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Axle diameters?? For new tool (/showthread.php?tid=5968)
Axle diameters?? For new tool - rboe - 09-07-2014
http://www.bajanopinch.com/shop/
I need 17mm for my Honda XR650L (primary target for this tool) but if I can use it on the CB - great! But I can't find the diameters of the front and rear axles so I can order the proper sleeves. You guys wouldn't happen to know would you?
RE: Axle diameters?? For new tool - Pterodactyl_imp - 09-07-2014
Sorry mate, I can't help you. The shop manual gives run out limits for the axles but not axle diameter. Short of pulling the axles and measuring, maybe contact Honda.
Cheers and good luck.
RE: Axle diameters?? For new tool - rboe - 09-07-2014
Push come to shove I'll pull the axle's, but being a lazy sort I thought I could avoid real work.
Most list on line are too dated to list the CB and as you found out, the shop manual has butkis on measurements save run out.Thanks anyway.