+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: cycle computer issue (/showthread.php?tid=5601)
cycle computer issue - DJS_imp - 05-26-2015
when the gas tank is nearing empty and the last bar flashes the display is supposed to allow/show miles to empty (MTE) and gallons left.
i have ran the gas that low 3 times.
the first time the display automatically switched.
the last 2 times it switched but displays no information on MTE or gallons left. it just shows a dash - .
anybody with similar experience?
not sure if there is a reset or something else i can try.
TIA.
RE: cycle computer issue - immgunn_imp - 05-27-2015
What mode is the screen in? "Total", "A", "B"? Does MTE work/not work in all three or just total?
RE: cycle computer issue - DJS_imp - 05-27-2015
i usually ride with the screen on the instantaneous MPG.
when the last gas bar started flashing it automatically switched to MTE.
i can toggle through all other displays and they work/display correctly except the MTE and gallons left.
for trip a and trip b it gives: miles, MPG, and gallons used.
MTE and gallons left can only be toggled to when the last bar is flashing.
RE: cycle computer issue - dr_rock_imp - 05-27-2015
Hmm, this must only be a 2014 thing huh? I believe the 2013s just flash (no MTE).
RE: cycle computer issue - Riko_imp - 05-13-2016
try reconnecting the battery, it worked after I did that.
could be due to that, or could be working on its own
not sure about that, but worth a try