+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Putz put in 10W40...Now what? (/showthread.php?tid=5500)
Pages:
1
2
Putz put in 10W40...Now what? - glenridgerich_imp - 09-24-2016
I got my oil changed at 4000 miles and the putz put in 10 W 40 should I switch it back to 10 W 30?
RE: Putz put in 10W40...Now what? - redbirds_imp - 09-24-2016
(09-24-2016, 05:36 AM)glenridgerich_imp Wrote: I got my oil changed at 4000 miles and the putz put in 10 W 40 should I switch it back to 10 W 30?
I wouldn't worry about it. I run 5W-40 Rotella in mine and the Honda shop manual says it's OK to use 10W-40.
RE: Putz put in 10W40...Now what? - Randy B - 09-24-2016
So long as it's designed for use with a wet clutch, you're fine. If not...change the oil and filter asap.
RE: Putz put in 10W40...Now what? - glenridgerich_imp - 09-24-2016
(09-24-2016, 06:36 AM)Randy B_imp Wrote: So long as it's designed for use with a wet clutch, you're fine. If not...change the oil and filter asap.
Sorry to sound like a girl but what's a wet clutch?
(09-24-2016, 05:51 AM)redbirds_imp Wrote:(09-24-2016, 05:36 AM)glenridgerich_imp Wrote: I got my oil changed at 4000 miles and the putz put in 10 W 40 should I switch it back to 10 W 30?
I wouldn't worry about it. I run 5W-40 Rotella in mine and the Honda shop manual says it's OK to use 10W-40.
I wouldn't worry about it. I run 5W-40 Rotella in mine and the Honda shop manual says it's OK to use 10W-40.
Phew!!
RE: Putz put in 10W40...Now what? - Randy B - 09-24-2016
(09-24-2016, 06:38 AM)glenridgerich_imp Wrote:(09-24-2016, 06:36 AM)Randy B_imp Wrote: So long as it's designed for use with a wet clutch, you're fine. If not...change the oil and filter asap.
Sorry to sound like a girl but what's a wet clutch?
(09-24-2016, 05:51 AM)redbirds_imp Wrote:(09-24-2016, 05:36 AM)glenridgerich_imp Wrote: I got my oil changed at 4000 miles and the putz put in 10 W 40 should I switch it back to 10 W 30?
I wouldn't worry about it. I run 5W-40 Rotella in mine and the Honda shop manual says it's OK to use 10W-40.
I wouldn't worry about it. I run 5W-40 Rotella in mine and the Honda shop manual says it's OK to use 10W-40.
Phew!!
A wet clutch is one that is bathed in oil. Your clutch and transmission share oil with the engine and thus the clutch is what is called wet. A dry clutch is just that....dry. It is not bathed in oil.
What you are looking for on the container is JASO. That will indicate that it is designed for use with a wet clutch.
![[Image: e66b04601f5d407dd1cec185a444680d.jpg]](https://cb1100forum.net/forum/uploads/imp/201609/e66b04601f5d407dd1cec185a444680d.jpg)
RE: Putz put in 10W40...Now what? - redbirds_imp - 09-24-2016
If your oil was changed at a bike shop, likely an oil was used that will work with a wet clutch. Automotive oils that contain friction modifiers (most 0W-20, 30 oils) will cause clutch slippage. I would not worry any more about it.
RE: Putz put in 10W40...Now what? - Cormanus - 09-24-2016
In the land Down Under most of us run 10W-40 all the time and it's just fine.
RE: Putz put in 10W40...Now what? - uscgmac_imp - 09-25-2016
I've been using 10w 40 for my last two oil changes because it's readily available everywhere. I have 8k miles on bike now. It is absolutely fine. I live on long Island where we have all four seasons. Very hot summers and very cold winters, I ride almost all year long. I use the Castrol full synthetic.
Sent from my SM-T350 using Tapatalk
RE: Putz put in 10W40...Now what? - Toddman_imp - 09-26-2016
I always use 10-40
Race bike gets 20-50
RE: Putz put in 10W40...Now what? - Rocky_imp - 09-26-2016
I use 10W-30 because that's what Honda recommends and it's quite easy to get here.