+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Upper engine mounting bolts (/showthread.php?tid=5389)
Upper engine mounting bolts - skimhitz_imp - 05-19-2014
Hey everyone,
I'm looking to install a set of SW-Motech crash bars on my CB1100, but I don't have the Honda service manual. Can someone tell me what the torque specifications are for the 4 upper engine mounting bolts? (the two bolts on either side towards the front of the engine) Much appreciated, thanks!
RE: Upper engine mounting bolts - CB4ME_imp - 05-19-2014
The manual says 36 ft/lbs for the 2 on the frame, 44 ft/lbs for the one connected to the engine.
I had a heck of a time on the 2 front bolts - they were on very tight.
RE: Upper engine mounting bolts - jdvalero_imp - 06-02-2017
(05-19-2014, 04:46 AM)CB4ME_imp Wrote: The manual says 36 ft/lbs for the 2 on the frame, 44 ft/lbs for the one connected to the engine.CB4ME
I had a heck of a time on the 2 front bolts - they were on very tight.
I'm kind of weary about installing mine.
Is this picture correct on the torque ?
Which bolt/nut did you torqued first?
Did you do a side at a time?
Did you prop something (car jack) under the engine?
And can anyone else verify this?
Sent from my SM-G955U using Tapatalk