+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: cb1100 fault codes reading and erasing (/showthread.php?tid=5196)
cb1100 fault codes reading and erasing - max - 05-04-2018
The following video shows where to find the service connector, how to access it and read stored fault codes.
it also shows a way to erase these codes with the help of a small wire jumper once the fault has been repaired or connectors have been replaced during service.
https://youtu.be/iwSllBQNsWc
this video is only intended for suitably competent riders with some knowledge of repairs to assist with their work.
max.
RE: cb1100 fault codes reading and erasing - SportsterDoc - 05-05-2018
(05-04-2018, 12:04 PM)max_imp Wrote: The following video shows where to find the service connector, how to access it and read stored fault codes.
it also shows a way to erase these codes with the help of a small wire jumper once the fault has been repaired or connectors have been replaced during service.
https://youtu.be/iwSllBQNsWc
this video is only intended for suitably competent riders with some knowledge of repairs to assist with their work.
max.
Well done, Max!
FSM 5-!4 does not reveal the resistance (<1500 ohm) of the "special tool". Kudos for supplying that info.
Meanwhile, I'll work on qualifying to be competent. Might need some help counting, without getting distracted!
RE: cb1100 fault codes reading and erasing - mechanic58_imp - 05-13-2018
*LIKE*