+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Horn switch position (/showthread.php?tid=5173)
Horn switch position - johan_imp - 06-16-2018
To all electrical wizards: would it be hard to modify the CB1100 electrical wiring in order to swap the light horn and sound horn switches?
Has anyone ever tried adding/substituting a form of sound horn switch underneath the turn signal?
Horn switch position - kennyw - 06-16-2018
Someone has swapped 2013 and 2014 controllers before. The 2013 has the standard horn and turn controls. 2014 had them swapped. Parts are interchangeable from what I understand.
RE: Horn switch position - Cormanus - 06-16-2018
The Ferret did it. See http://cb1100forum.com/forum/showthread.php?tid=3549, although the pictures have gone.
RE: Horn switch position - PowerDubs_imp - 06-17-2018
I put both sides '13 controls on my '14- both for the more traditional look, and to stop hitting the horn all the time.
If I remember correctly the locating pins were in a different spot- but I was swapping on rebel handlebars at the same time so had to drill anyway.
The wiring and plugs were the same, no modifications needed.
RE: Horn switch position - the Ferret - 06-17-2018
Yep put a 13 switch on mine as have a few others. Plug and play except for drilling a new locating hole, and the 13 uses different length screws.
RE: Horn switch position - dave - 06-18-2018
(06-16-2018, 05:16 PM)Cormanus_imp Wrote: The Ferret did it. See http://cb1100forum.com/forum/showthread.php?tid=3549, although the pictures have gone.
I swapped mine also.