+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: IACV Replacement Tips (/showthread.php?tid=5069)
IACV Replacement Tips - snackie_imp - 11-08-2018
Has anyone personally replaced the IACV on there CB1100? If so, any tips?
For instance, does the throttle body have to be taken out to do the job?
Thanks,
Bryan
RE: IACV Replacement Tips - peterbaron - 11-08-2018
Yes, Dave + ?? ,backed by technical assistance by few forum members:
http://cb1100forum.com/forum/showthread.php?tid=9117&highlight=IACV
http://cb1100forum.com/forum/showthread.php?tid=12203
http://cb1100forum.com/forum/showthread.php?tid=8120&highlight=idle+fluctuation
http://cb1100forum.com/forum/showthread.php?tid=9117
+ few more. Use search to find out more
Have fun
P.s Do you want just replacement or diagnose your problem first, two different things.
Study before digging.
RE: IACV Replacement Tips - snackie_imp - 11-08-2018
Peter,
Thank you so much. Looks like there's plenty of tips in those threads and, yes, I will do my best to troubleshoot the IACV before ripping the bike apart.
Best regards,
Bryan
RE: IACV Replacement Tips - peterbaron - 11-08-2018
(11-08-2018, 10:46 AM)snackie_imp Wrote: Peter,
Thank you so much. Looks like there's plenty of tips in those threads and, yes, I will do my best to troubleshoot the IACV before ripping the bike apart.
Best regards,
Bryan
No problem, this forum provides a lot of info, just to mention few names about this particular topic; Dave, Max, popgun, SportsterDoc + few more.... as said: study before working and good luck
RE: IACV Replacement Tips - Lord Popgun - 11-08-2018
As he said, do study first. Its not an easy or quick job to get to the IACV.
First step in the manual: Disassemble rear half of motorcycle
RE: IACV Replacement Tips - peterbaron - 11-08-2018
If my memory is good, there was Max??? post of faster approach by using modified Allen key ( but I am not 100% sure), so check it first
RE: IACV Replacement Tips - Lord Popgun - 11-08-2018
Yeah, we did go through that and it doesn’t work. You can’t get to it without removing the TB and that is a J.O.B.
RE: IACV Replacement Tips - peterbaron - 11-08-2018
OK, thanks
RE: IACV Replacement Tips - max - 11-09-2018
Bryan none of us have the issue ourselves so we have to make best guesses but we learned a lot through Dave who did fix his iacv. there are two other members who have had success with this repair, it seems to only affect some 2014 models ( with some exeptions ) and we don't know why.
The iacv is a motorized air valve that regulates the amount of air to maintain 1050 rpm at idle, very much like opening the throttle slightly, it replaces the old school idle adjust screw and combines with the choke function and makes it automatic, it gets " stuck " at some point and gets worse over time.
Popgun is right, i thought i had found a shortcut but i was wrong, it did not work unfortunately.
The throttle body can stay where it is but the airbox needs to be removed towards the back so the tank, batterybox, rear fender etc have to be removed to gain access to the iacv which you need before all this is done, take lots of pictures so you know how things looked prior to removal.
Something that may work for you is disconnecting it when the bike behaves, is warmed up and idles at 1050 rpm, the piston inside will then stay open and doesn't move so the idle rpm stays around 1050 when warmed up, you need to remove the right hand plastic throttle body cover with the plastic screw and tilt it down to get access to the blue 4 pole connector, you squeeze the tab in the middle to unlock it and pull it out whilst the bike idles at 1050 rpm.
However you will get an orange check engine light blinking indicating a defect iacv code and may have to open the throttle a bit to get the engine to start initially but that may work ok in Hawaii because of the warm climate.
The c.e.l. light will stop when the connector is re-connected but the code remains in the memory and not visible unless it is in "service mode" and can then be erased by a sequence of the red service connector electrical wire link.
here is how to do this; https://youtu.be/iwSllBQNsWc
RE: IACV Replacement Tips - Cormanus - 11-09-2018
max, do you need the special bit of wire with a resistor or will any bit of wire work?