The CB1100 Community Forum
Turn Signal Removal - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread: Turn Signal Removal (/showthread.php?tid=497)

Pages: 1 2

Turn Signal Removal - Nibis_imp - 12-27-2021

I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.

RE: Turn Signal Removal - mvk24_imp - 12-27-2021

(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

RE: Turn Signal Removal - Cormanus - 12-27-2021

Let us know how you go searching, mvk24. I’ve relocated my rear turn signals recently enough to have a vague memory of how I did it.

RE: Turn Signal Removal - Nibis_imp - 12-27-2021

I found the wire harness adapters, resistors and some adapters that should work.

RE: Turn Signal Removal - peterbaron - 12-27-2021

(12-27-2021, 08:55 AM)mvk24_imp Wrote:
(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985

RE: Turn Signal Removal - mvk24_imp - 12-27-2021

(12-27-2021, 10:36 AM)peterbaron_imp Wrote:
(12-27-2021, 08:55 AM)mvk24_imp Wrote:
(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: I found the wire harness adapters, resistors and some adapters that should work.
Those look cool, my turn signals are done but do you have a link for those?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

RE: Turn Signal Removal - Nibis_imp - 12-27-2021

(12-27-2021, 10:48 AM)mvk24_imp Wrote:
(12-27-2021, 10:36 AM)peterbaron_imp Wrote:
(12-27-2021, 08:55 AM)mvk24_imp Wrote:
(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: I found the wire harness adapters, resistors and some adapters that should work.
Those look cool, my turn signals are done but do you have a link for those?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: I found the wire harness adapters, resistors and some adapters that should work.
Those look cool, my turn signals are done but do you have a link for those?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca https://www.motorcycleid.com/show-chrome/plastic-rear-turn-signal-light-relocator-mpn-53-439t.html?singleid=1644723527&url=131385219



Sent from my SM-G986U1 using Tapatalk

RE: Turn Signal Removal - Nibis_imp - 12-28-2021

(12-27-2021, 10:36 AM)peterbaron_imp Wrote:
(12-27-2021, 08:55 AM)mvk24_imp Wrote:
(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware.

RE: Turn Signal Removal - mvk24_imp - 12-28-2021

(12-28-2021, 03:12 AM)Nibis_imp Wrote:
(12-27-2021, 10:36 AM)peterbaron_imp Wrote:
(12-27-2021, 08:55 AM)mvk24_imp Wrote:
(12-27-2021, 08:43 AM)Nibis_imp Wrote: I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware.
I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread.php?tid=17287&pid=304616#pid304616

http://cb1100forum.com/forum/showthread.php?tid=9405&pid=300300#pid300300

http://cb1100forum.com/forum/showthread....424&page=2

[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware. The front and rear are a bit different.

The rear you have to remove the 2 bolts that are also your tie downs. That will let you remove the black peice of metal that your turn signals are mounted to.

The rear most tie down/bolt on each side goes through a plate on the back side that holds the rear turn signal housing in place.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

RE: Turn Signal Removal - Nibis_imp - 12-28-2021

[/quote]The front and rear are a bit different.

The rear you have to remove the 2 bolts that are also your tie downs. That will let you remove the black peice of metal that your turn signals are mounted to.

The rear most tie down/bolt on each side goes through a plate on the back side that holds the rear turn signal housing in place.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
[/quote]

Thanks, that is what I was looking for, makes sense now.