The CB1100 Community Forum
Wiring Lighting - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Wiring Lighting (/showthread.php?tid=4290)



Wiring Lighting - ymtnpoah11_imp - 02-21-2023

Best practices for wiring when replacing lighting?

I have a damaged tail light and turn signal ready to replace. It appears there are no connectors at these ends.

I suppose I can solder the signal connection, but what about the tail light?

One thread I found discussed removing the fender and accessing the wiring harness under the battery box. Is there a better way?

Thanks!


 RE: Wiring Lighting - j3gq_imp - 02-21-2023

(02-21-2023, 05:30 AM)ymtnpoah11_imp Wrote: Best practices for wiring when replacing lighting?

I have a damaged tail light and turn signal ready to replace. It appears there are no connectors at these ends.

I suppose I can solder the signal connection, but what about the tail light?

One thread I found discussed removing the fender and accessing the wiring harness under the battery box. Is there a better way?

Thanks!

could you please describe model, type of light (led?), and damage
because it depends


RE: Wiring Lighting - ymtnpoah11_imp - 02-21-2023

2014 Black (USA)
I'm replacing oe lights with oe lights
The entire chrome housings


RE: Wiring Lighting - Randy B - 02-22-2023

(02-21-2023, 11:57 AM)ymtnpoah11_imp Wrote: 2014 Black (USA)
I'm replacing oe lights with oe lights
The entire chrome housings

There absolutely is a connector under the fender. It's a short pigtail with the light socket on it. #2 in the image.

https://www.hondapartshouse.com/oemparts/a/hon/52f28c0ef870021404ec5a4e/taillight


RE: Wiring Lighting - Lord Popgun - 02-22-2023

In real life the pigtail goes to a boot under the seat on the left side of the space the battery is in.


RE: Wiring Lighting - Randy B - 02-23-2023

(02-22-2023, 04:23 AM)Lord Popgun_imp Wrote: In real life the pigtail goes to a boot under the seat on the left side of the space the battery is in.

Ah, thank you LPG. I haven't messed with the tail light at all, but the pigtail didn't look long enough in the picture to reach that far.


RE: Wiring Lighting - Lord Popgun - 02-23-2023

Randy, the fiche for the rear turn signals shows the same short leads, but they actually go to that boot too. Are longer than the drawing looks.


RE: Wiring Lighting - ymtnpoah11_imp - 02-23-2023

Okay. So the connections are near the battery. Then one way to replace oe lights would be to remove the fender and de-route and re-route the wiring harnesses as they are.

But... is there an easier way? (that's still durable/sound)

I imagine someone has replaced lighting and done it differently.


RE: Wiring Lighting - Obleo - 02-24-2023

No need to remove the fender.


RE: Wiring Lighting - Cormanus - 02-24-2023

ymtnpoah11, I don’t think it’s all that difficult. Take the seat off and you can easily access the wiring.