+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: removing rear turn signal (/showthread.php?tid=4267)
Pages:
1
2
removing rear turn signal - modmaster_imp - 03-17-2016
Where is the connector for the rear turn signal wire? I'm trying to remove it and I don't see where the pin connector is. Can anyone help me out? I don't have the factory service manual yet and a few searches didn't reveal the right information.
modmaster
RE: removing rear turn signal - mattmcuomo@yahoo.com - 03-17-2016
On mine, 2014 standard, they are under the fuse box, under the tool cubby thing.
Sent from me......
removing rear turn signal - kmoney_imp - 03-17-2016
Yup. Take out the storage box and possibly even the battery if you want more room. They (two signals and a tail/stop light connection) are all contained in the giant opaque rubber boot along with that red accessory connector.
RE: removing rear turn signal - Motogeezer1949_imp - 03-21-2016
Easy peasy.
RE: removing rear turn signal - DaSwami_imp - 04-24-2016
OK, reviving this briefly, on the fender, under the seat, the rear tail light and turn signal wires are captured by a tack welded "C" shape of metal that is open on one end but sits tight very close to the fender. Do you just pry this open to release the wires or just pull them out and force them back through??
removing rear turn signal - WhiskeyUSMC1979_imp - 04-24-2016
Gently pry.
Sent from an undisclosed location
RE: removing rear turn signal - DaSwami_imp - 04-24-2016
Thanks. After studying this closely I think I can safely remove them and re-install with the new "C-Bow" system from H&B afterall.....
RE: removing rear turn signal - Jeya_imp - 09-06-2017
(04-24-2016, 06:53 AM)DaSwami_imp Wrote: Thanks. After studying this closely I think I can safely remove them and re-install with the new "C-Bow" system from H&B afterall.....
Hi, i am also going to install the c bow carrier. After removing the rear blinkers, did you need to fabricate and extend the blinker cables or was there enough stowed away to be stretched out?.
RE: removing rear turn signal - kennyw - 09-07-2017
(09-06-2017, 02:46 AM)Jeya_imp Wrote:(04-24-2016, 06:53 AM)DaSwami_imp Wrote: Thanks. After studying this closely I think I can safely remove them and re-install with the new "C-Bow" system from H&B afterall.....
Hi, i am also going to install the c bow carrier. After removing the rear blinkers, did you need to fabricate and extend the blinker cables or was there enough stowed away to be stretched out?.
You have to extend your wires. There is nothing extra. I went with LED aftermarket lights with longer leads. You can see my pics in the link in my signature.
RE: removing rear turn signal - kzoorue_imp - 04-20-2023
(09-07-2017, 12:02 AM)kennyw_imp Wrote:(09-06-2017, 02:46 AM)Jeya_imp Wrote:(04-24-2016, 06:53 AM)DaSwami_imp Wrote: Thanks. After studying this closely I think I can safely remove them and re-install with the new "C-Bow" system from H&B afterall.....
Hi, i am also going to install the c bow carrier. After removing the rear blinkers, did you need to fabricate and extend the blinker cables or was there enough stowed away to be stretched out?.
You have to extend your wires. There is nothing extra. I went with LED aftermarket lights with longer leads. You can see my pics in the link in my signature.
You have to extend your wires. There is nothing extra. I went with LED aftermarket lights with longer leads. You can see my pics in the link in my signature.
You have to extend your wires. There is nothing extra. I went with LED aftermarket lights with longer leads. You can see my pics in the link in my signature.
So, how best to "extend" the wires? Sorry, could not find your pics.