The CB1100 Community Forum
Replace clutch Lever - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Replace clutch Lever (/showthread.php?tid=4115)

Pages: 1 2

Replace clutch Lever - Davidjill_imp - 02-02-2025

Good morning,

Dropped bike yesterday, need to replace clutch lever.

New one ordered

Is it simply a cases of remove holding bolt drop out old lever, replace with new and refit bolt?

Thanks

RE: Replace clutch Lever - peterbaron - 02-02-2025

Yap, but you have to transfer the brass bush # 2

https://www.hondapartshouse.com/oemparts/a/hon/52f28beef870021404ec5a36/clutch-master-cylinder

RE: Replace clutch Lever - Cormanus - 02-02-2025

Are you OK, Davidjill?

RE: Replace clutch Lever - Davidjill_imp - 02-02-2025

(02-02-2025, 09:07 PM)peterbaron_imp Wrote: Yap, but you have to transfer the brass bush # 2

https://www.hondapartshouse.com/oemparts/a/hon/52f28beef870021404ec5a36/clutch-master-cylinder

Thanks for the heads up
(02-02-2025, 09:27 PM)Cormanus_imp Wrote: Are you OK, Davidjill?

Yes all good thanks.

Just got back from 50 plus mile ride, Jill my partner got off bike, I thought I had put side stand down, clearly hadn't as promptly proceeded to drop 250Kgs of bike !

Broke clutch lever, scratched mirror, Handlebar end and LHS Crank cover! Badly bruised my ego but i am sure that will repair itself !

RE: Replace clutch Lever - the Ferret - 02-03-2025

that's a bummer

RE: Replace clutch Lever - Davidjill_imp - 02-03-2025

(02-03-2025, 01:11 AM)The ferret_imp Wrote: that's a bummer

Yes similar to the words i used too........Angry

RE: Replace clutch Lever - Cormanus - 02-03-2025

I’ve done that. Glad you’re ok.

RE: Replace clutch Lever - Davidjill_imp - 02-03-2025

(02-03-2025, 05:49 AM)Cormanus_imp Wrote: I’ve done that. Glad you’re ok.

Thank You Wink

RE: Replace clutch Lever - rdprdp01 - 02-03-2025

All those parts are readily available and easy to install. But the best news is that you and Jill are fine and will ride another day on your beautiful motorcycle. David

RE: Replace clutch Lever - Gone in 60 - 02-05-2025

Never like to hear that someone forgot to put the side stand down, but most of us have done it at some point. In my case, twice, both times with an audience. Glad to hear that the damage was minimal and that you just need to replace a lever (and I'm assuming transfer your RLET to the new lever.)