+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Engine mount bolt torque value (/showthread.php?tid=4770)
RE: Engine mount bolt torque value - E11even_Hunnit - 07-31-2020
I just installed SW-Motech's on my bike. One of the bolts had some oxidation but not as bad as pictured. I made sure to use loctite on the nuts securing the frame Bolts in place.
Also, others have recommended wrapping up the lower portion of the frame prior to mounting the U-bolt clamp to prevent scuffing of the frame itself
They seem to blend fairly well for the post part
![[Image: 19e94bd96883ab24ea3a0190470f5f2d.jpg]](https://cb1100forum.net/forum/uploads/imp/202007/19e94bd96883ab24ea3a0190470f5f2d.jpg)
RE: Engine mount bolt torque value - mrded_imp - 07-31-2020
@E11even_Hunnit, I see you didn't install engine guards in time
RE: Engine mount bolt torque value - E11even_Hunnit - 07-31-2020
(07-31-2020, 09:19 AM)mrded_imp Wrote: @E11even_Hunnit, I see you didn't install engine guards in time
Unfortunately that was done by the previous owner. I got the bike that way
RE: Engine mount bolt torque value - treedoc_imp - 07-31-2020
I like your bike mate